Product Details

Cutting tool YAMAWA Spiral Taps

Professional and High quality TAP with multiple functions made in Japan

Together with the development of cutting technology.

taps are getting more and more important.

With consistent cutting and reliatable performance.

Our Santotec taps answer the diversifying needs of users and their period.

Features of "Spiral Taps"

Spiral flutes pull out chips backward against tapping direction. Spiral Taps is most suitable for blind hole tapping.
With excellent cutting performance, Spiral Taps is suitable for sticky materials such as the Stainless,Carbon Steel,Steel alloy,and Steel.

Spiral Fluted Taps(for blind hole)

ISP,SP-Y,SP(N-SP),+SP(N+SP),XSP,SP-OX(N-SP-OX),+SP-OX(N+SP-OX),SP(LH)(N-SP(LH)),SP-V(N-SP-V),AU+SP,AUXSP,LS-SP(LS-N-SP),LS-N-SP(LH)),LS-SP-V(LS-N-SP-V),

LS-SP-K,SU+SP SU-SP,SUXSP,SU2-SP,SU-S-SP,LS-SU-S-SP,S-SP,E-SP,HC+SP HC-SP,HC+SP-OX HC-SP-OX,U-SP,AL+SP AL-SP,STI-SP,LO-SP,LS-LO-SP,MC-SP,ZET-B,PM-SP,LS-PM-SP,F-SP,LS-F-SP,HFIHS,HFISP,HFSHS,HFASP,HDISP,HDASP

Spiral Fluted Taps(for through hole)

XSL,AU+SL,AUXSL,SU+SL,AUXSL,SU+SL,SUXSL,ZET-P,F-SL,LS-F-SL,HDISL

Spiral Pointed Taps

IPO,PO-Y,PO(N-PO),+PO(N+PO),PO-OX(N+PO-OX),PO(LH)(N-PO(LH)),PO-V(N-PO-V),(LS-PO(LS-N-PO),LS-PO-V(LS-N-PO-V),LS-PO-K,SU+PO SU-PO,PO STI(N-PO STI),MC-PO,EH-PO,ZEN-P,PM-PO,LS-PM-PO

Type
X Series	x Series derive the maximaum performance from high facility machinng centers and high precision toolings.
Plus Series	By adopting rennovated new tap blank and new design,Plus Series realize the longer tool life.
I Series for general purpose	I Series are special for manual operation and drilling machine use.
Standard Top Series	Standard Top Series provede cinsistent tappings at middle tapping speed area.
Roll Tap Series	Roll Taps,having no cutting edges,form threads without producing chipis.They are also called Thread Forming Taps.
Ripe Tap Series	Ripe Taps cut pipe threads in pipes and conduits.
Carbide Tap Series	Carbide Taps are made from ultra micro grain carbide which features high wear resistance and toughness.

X Series-------------------------------------------------------------------------

X Series derive the maximum performance from high facility machining centers and high precision toolings.

Features

X Series are the taps that derive the maximum performance from most modern high facility machining centers and high precision toolings.
Original role of taps is to "cut threads". From this view point, YAMAWA has developed the most suitable cutting edge design from re-desining basic tap geometry.
Superb development in the run-out tolerance of whole tap and in shank roundness has enabled the taps to cut consistent and high quality threads even in higher tapping speed area.

Plus Series -------------------------------------------------------------------------------------------

We have 2 line-ups in Plus Series depending on the hole shape, +SP for blind hole and +PO for through hole.

Features of "+SP", blind hole use

With the thread portion designed most suitablely for middle tapping speed area on machining centers, +SP is the tap for blind hole use.
The use under full rigid lead feed realizes higher efficiency.
Size range is the coarse threads from M2 to M6.

Features of "+PO", through hole use

For middle tapping speed area on machining centers.
Higher efficiency under full rigid lead feed.
Size range: coarse threads from M2 to M6.

I Series for general purpose----------------------------------------------

ISP I Series, Spiral Fluted Taps for general purpose

Name: Professional and High quality TAP with multiple functions made in Japan
Brand: YAMAWA
Availability: InStock

IPO I Series, Spiral Pointed Taps for general purpose

IPO is suitable for tapping general fasteners made from thin steel sheets such as SPC and SPH, and such soft steels lower than SS400 and S20C. IPO is oxided to be suitable for these materials.

IHT I Series, IHT Hand Taps for general purpose

IHI is suitable for tapping general fasteners made from thin steel sheets such as SPC and SPH, and such soft steels lower than SS400 and S20C.

Standard Tap Series--------------------------------------------------------

In Standard Tap Series, there are 3 kinds of taps, HT(Hand Taps),SP(Spiral Fluted Taps) and PO(Spiral Pointed Taps). To answer wide range of demand, YAMAWA prepares taps not only for Metric threads, but for Unified and Whitworth threads.

Features of "HT"

HT's straight flutes can accommodate chips.
HT has 3 chamfer types depending on the length of chamfer, taper, plug and bottoming.

Features of "SP"

Spiral flutes pull out chips backward against tapping direction. SP is most suitable for blind hole tapping.
With excellent cutting performance, SP is suitable for sticky materials.

Features of "PO"

Spiral pointed flutes push chips forward in the direction of tapping. PO is most suitable for through hole tapping.
PO has less tapping torque due to less chip trouble.

Ripe Tap Series--------------------------------------------------------------

In connecting pipes and pipe parts, these pipe taps are used mainly for pipe threads of mechanical joints.

Features

There are 2 types of pipe taps, one for parallel threads and the other for taper threads. The pipe taps for parallel threads are used for cutting the parallel threads to be used maily for mechanical joints. The pipe taps for taper threads are used for cutting taper threads to be used for pressure tight joints, such as water pipes and gas pipes. Taper threads are the threads which diameter reduces on the cone shape.

Please verify product search or catalog for more information.

Roll Tap Series---------------------------------------------------------------

Also called forming taps. With no cutting edges, Roll Taps form threads without producing chips.

Features

Roll Tap is the tap that forms threads by deforming materials, producing no chips. Roll taps are most suitalbe for blind hole tapping in softer materals.
Roll taps have no flutes for chip ejection, but can have oil grooves for good lubricant supply.
Threads formed by roll taps are very strong and have less deviation on their pitch diameters.

Please verify product search or catalog for more information.

Cabide Tap Series------------------------------------------------------------

Carbide taps are difficult to break on continuous tapping.

Features

Carbide Taps are made from ultra micro grain carbide which features high wear resistance and toughness.
Carbide taps are suitable for high volume tapping and continuous tapping. They are difficult to break and have high durability.

Please verify product search or catalog for more information.

--------------------------------------------------------------------------------------

Trade Detail Main Marcket and Distribution

Asia paciffic CHINA,HONG KONG,VIETNAM,INDNESIA,THAILAND

Europe GERMANY,CZECH

----------------Brand handled-------------------------------------------------

Cutting Tools

MITSUBISHI MATERIALS

TUNGALOY

KYOCERA

OSG

SUMITOMO

Drills

IWAHASHI

YAMAWA

SANDVIK

OMI

MIYANAGA

MURAKI

TRUSCO

Tooling Fixturing

BIG DAISYOWA SEIKI

BIG

Magnets

KANETEC

NOGA JAPAN

MAGNA

Mesuring Tool & Test Instruments'

SHINWA

NAKAMURA MFG

MITUTOYO

NIGATA SEIKI

MIGISHITA SEIKI

AICHI TOKEI DENKI

RIKEN KEIKI

HIOKI E.E.

SANWA

NAGANO KEIKI

DAIICHI KEIKI

TOKYO SEIMITSU

TGK

Fitting & Tubing

PISCO

CKD

SMC

MYOTOKU

CHIYODA TSUSYO

TAIYO

Filters

KANAI JUYO KOGYO

NIHON FILTER

Deeping & Ball Bearings

NTN

EVER-ON

OILES

KATAYAMA CHAIN

TSUBAKIMOTO CHAIN

THK

NIDEC-SHIMPO

MITSUBOSHI BELTING

NIPPON BEARING

Machine Tools

IMAO

NOK

ORI & MEC

KOHO KOSAN

SUGATSUNE

INOAC

Electronic Parts

IDEC

AIHARA DENKI

PATLITE

HOZAN