Product Details

Standard Air Cylinder

Easy Installation and Reliable taiyo air cylinder cylinders for industrial applications CKD,SMC,KOGANEI,TAIYO

Working Fluids

Action Style

Bore Size mm

100

125

140

150

160

180

200

224

250

Double-acting Single-rod with switch

B Rod

•

–

Specifications

Action Style		Double-acting Single-rod/with switch
Available Bores(mm)		Ø50·63·80·100·125·140
Mounting Style		SD·LA·LB·FA·FY·TA·TC style
Rod diameter type		B Rod
Nominal Pressure		7MPa
Max. AllowablePressure		9MPa
Proof Test Pressure		21MPa
Min. Working Pressure	Rod Side	0.45MPa and below
	Head Side	0.3MPa and below
Operating Speed Range		Ø 50· Ø 63:8∼400mm/s Ø80∼ Ø 125:8∼300mm/s Ø 140∼ Ø 250:8∼200mm/s
Temperature Range		-10∼+80ºC (But do not use wnen frozen)
Structure of Cushioning		Metal fitting type
Working Fluid		Petroleum-based fluid (For other working oil, refer to the table of working oil adaptability.)
Tolerance of Thread		JIS 6g/6H
Stroke Tolerance		Less than 100mm₀^+0.8100—250mm₀^+1.0251—630mm₀^+1.2 631mm₀^+1.41001—1600mm₀^+1.61601—2000mm₀^+1.8
Accessories	Rod End Attachments	Rod End Attachments(Single-clevis (T-end))·(Double-clevis (Y-end))·Floating joint (F-end)
	Rod Boot	Standard:Nylon tarpaulin Semi-standard:Chloroprene·Conex
	Others	Lock nut

Note)	Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.
Note)	There is a hole with Ø 13∼ Ø 16 right through the piston rod. Please be noted that there may be oil leak if the piston rod get damaged when a set screw is fixed.
Note)	Do not loosen the flange of rod end. The oil may blust out.
Note)	Temperature range is different depend on the packing material. Please refer to the selection material.
Note)	If using lock nut at the end of piston rod, please order to lengthen the thread length of piston rod end (A dimension).
Note)	Conex of boots is the registered trade mark of Teijin,Ltd.

Specifications of Detector

Power supply		DC24V±2V 0.05A
Accuracy	Linearity	±0.025%FS or ±75μmTYP
	Resolution Ability	±0.01%FS or ±30μm and below
	Repeatability	±0.01%FS or ±30μm and below
	Temperature Character	40ppmFS/ºC or 12μm/ºC and below
Output		Current output 4∼20mA Load resistance 500Ω and below Consult for voltage output (0∼10V etc.)
Frequency characteristic		Scanning frequency 1kHz
Temperature Range		-20ºC ∼+80ºC (But do not use wnen frozen)
Impact-resistant		50G 2m/s
Vibration-resistant		6G or 40Hz2mmPP
Protective structure		IP67 (10kPa, 30min)

Note)	Above specification is based on a single detector.
Note)	The accuracy value is the large value which mentioned beside.
Note)	When the detector is fixing on a cylinder, the accuracy mentioned above may be different depending on the pressure and load which may deformed the parts of cylinder. The repeatability accuracy at a same situation may get a similar value as mentioned above.
Note)	The output at retracted end is 4.0∼4.5mA or 0∼0.3V, and at extended end is 12∼20mA or 5∼10V. (There may be some parts of effective length of sensor is not available depending on the stroke) Please set the controller based on the output of actual extended end and retracted end.
Note)	Please consult for extend/retract end output adjustable sensor type.

Compatibility of Working Fluid and Packing Material

Material	Working Fluids
Material	Petroleum-based Fluid	Water-Glycol Fluid	Phosphate-Ester Fluid	Water in Oil Fluid	Oil in Water Fluid
1:Nitrile rubber	Ο	Ο	x	Ο	Ο
2:Urethane rubber	•	x	x	Δ	Δ
3:Fluoric rubber	Ο	x	Ο	Ο	Ο
6:HNBR	Ο	•	x	•	•

Note1)	The • and Ο -marked items are applicable, while • -marked items are inapplicable. Please contact to us when you use Δ-marked items.
Note2)	The • -marked items are the recommended packing materials in case of the first priority to abrasion resistance.

Other cylinder

----------------Brand handled-------------------------------------------------

Cutting Tools

MITSUBISHI MATERIALS

TUNGALOY

KYOCERA

OSG

SUMITOMO

Drills

IWAHASHI

YAMAWA

SANDVIK

OMI

MIYANAGA

MURAKI

TRUSCO

Tooling Fixturing

BIG DAISYOWA SEIKI

BIG

Magnets

KANETEC

NOGA JAPAN

MAGNA

Mesuring Tool & Test Instruments'

SHINWA

NAKAMURA MFG

MITUTOYO

NIGATA SEIKI

MIGISHITA SEIKI

AICHI TOKEI DENKI

RIKEN KEIKI

HIOKI E.E.

SANWA

NAGANO KEIKI

DAIICHI KEIKI

TOKYO SEIMITSU

TGK

Fitting & Tubing

PISCO

CKD

SMC

MYOTOKU

CHIYODA TSUSYO

TAIYO

Filters

KANAI JUYO KOGYO

NIHON FILTER

Deeping & Ball Bearings

NTN

EVER-ON

OILES

KATAYAMA CHAIN

TSUBAKIMOTO CHAIN

THK

NIDEC-SHIMPO

MITSUBOSHI BELTING

NIPPON BEARING

Machine Tools

IMAO

NOK

ORI & MEC

KOHO KOSAN

SUGATSUNE

INOAC

Electronic Parts

IDEC

AIHARA DENKI

PATLITE

HOZAN