Specifications

Release film coating machine
1. Quantitative coating
2. Changeable coating methods
3. Energy-saving drying system

Release film coating machine

 widely used in: PE polyethylene film, LDPE low density polyethylene film, HDPE high density polyethylene film coating process

the production. Such as release film, protective film, scratch-resistant film etc

 

main parameter:

1. Whole machine controlled by PLC
2. Tension controller adopts Mitsubishi
3. Main motor adopts ABB motor .
4. The dry oven length is about 18 meters
5. Machine speed is about 180mmin
6. Coating speed is about 160mmin
7. Coating mode depends on the coating thickness, the solid content and the viscosity .  
8. Heating type :Electric heating ,Oil heating ,Steaming heating (You can choose one which is most economically )..

Model	Tb300   Tb600   Tb800  Tb1000  Tb1100  Tb1300  Tb1600  TB1600+
Coatingwidth	300mm 600mm 800mm 1000mm 1100mm 1300mm 1600mm 1600+mm
Material	Roll material such as film, Paper, Cloth, Foil, etc.
Unwinding dia.	φ300~800mm   φ300~1500mm
ewinding dia.	φ300~800mm  φ300~1500mm
Oven temperature	30 ~ 220°C(According to the material)
Oven length	3 ~ 48 m  (According to the material)
Coating speed	10 ~ 150 m/min (According to the material)
Coating type	Comma scraper coating, veins roller coating, three-rollers coating, etc.
Heating tyope	Electric heating, steam heating, oil heating, etc.