The fibers, either of single-mode or multi-mode type, are placed in a aluminum tube. The tubes are filled with a water-resistant filling compound. A steel wire sometimes sheathed with polyethylene(PE) for cable with hight fiber count,locates in the center of core as a metallic strength member. Tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate(APL) is applied around the cable core,which is filled with the filling compound to protect it from water ingress.Then the cable core is covered with a thin PE inner sheath. After the single-steel armored, the cable is finally completed with an outer sheath.

Characteristics:

1). Stainless steel or galvanized steel self--supporting messenger construction

2). Special tube filling compound ensure a critical protection of fiber

3). High strength loose tube that is hydrolysis resistant

4). Steel wire used as the central strength member

5). Excellent mechanical and environmental performance 

6).100% cable core filling 

 Application:

 Sumarine water and vertical shaft 

Note

1. Only a part of cables are listed in the table. Cables with other spans can be inquired.

1. Packaging	Wooden drum, 3000m to 5000m/drum or as you required
   Shipping methods.	By sea or by air
   Sheath mark applied at 1-meter intervals	a. Supplier: Changguang or as customer required
   	b. Standard Code(Product Type, Fiber Type, Fiber Count)
   	c. Year of manufacture: xxx
   	d. Length marking in meters

24 Hours online service.

Enquiry will be replied in 2 hours.

Factory price with good service .

Free sample for 1 meter cable.

Changguang communication Technology (Jiangsu)Co., Ltd is aprofessional manufacturer of fiber optic cable in China for more than 10 years. 

We can supply a complete range of outdoor optic fiber / aerial fiber optic cable

duct fiber optic cable/ directly buried fiber optical cable/ ADSS, OPGW and

 OPPC for power system transmission.

Our Main market for direct buried Amored underwater fiber optic cables

 Q1:Can I have a sample for testing?

A: Actually we think samples are not very important.You can buy from anywhere.But we think

our cargos will better then any others.

Samples will be 10% higher then the cargo if your sample request is more than 1 meter.

Q2:Can I add my logo on the cable?

A:Yes,OEM are available for us.

But you should send us the Trademark authorization letter.

Q3 :Do you have inspection procedures for optic cable?

A:100% self-inspection before packing

Q4:Can we mix the 20ft container?

A: Yes,if the items are meet our min order qty.

Q5:Can I have a visit to your factory before the order?

A: Sure,welcome to visit our factory.

Here is our factory address: B02 west district Taiwanese Industrial Park,Suqian city ,JiangSu provice China.

Our factory is near from GuanYin Airport of Xuzhou.We can pick you up in the airport.

Hotel booking service is available .