Product Details

Rescue Lighting Rope Application Instruction

(KPT—D200 Type)

1.Products in Package

1pc 200 meter wire wheel

1pc 220v/110 V charger

1pc 5m connecting line

1pc auto power connector

1pc solar charging board

1bag Plastic binding strip

2. Application Method

1.Taking out the EL wire wheel.

2.Turn on the switch to judge if there is power or not. The function is On/Off/Twinkle.

3.Under the condition of lighting, EL wire can be pulled or reeled in.

4. To EL wire,Plastic binding strip can be used and removed repeatedly.

5.Rotate the handle to reel the EL wire in neatly for easy pulling next time.

3. Three Mode of Charging:

Turn off the switch before charging.

1. To connect AC220V/110V Charger,Suggest to charge for 8 hours for fully loading.

2. Take out solar panels and in direct sunlight place, use the connecting line to charge for 8 hours, load power for 80%. Please immediately disconnected line when not charge , or in a state of discharge.

3. Car DC12V charge: run the car but do not trample accelerator, connect lead wire with Car Electrical Source Plug, then connect to Car power . continuous charging 0.5 hours, in power for 50%. And cut off the connecting wire while not charging to avoid discharging.

4. Technical Data:

Emitting light colors	blue-green	Carrying electricity use time	5 hours
flashing use time	8 hours	The biggest sustain tension	20 kg
Power	100 w	No electricity luminous use time	1-3 hours
Weight (including packaging)	27kg	Lithium battery charging and discharging times	>500 times (can change)
Visible distance	100 meters	Shine rope use life	1000 hours
electric stock	30%	Full battery electric dry save	30 days
Conditions of use	DC12V	Battery limit temperature	-20 to+60 °C
Output frequency	1500 Hz	Length error	±10 meters

5.Remarks:

EL wire and wheel can not be used in rain or water environment.Pls. do not launch engine when connecting with 12V Car power for direct application.

EL wire will not work or have Short circuit if bending angle is less than 45 degree or pulling strength is beyond required resist of pull. Pls. do not remove end parts or Inner equipment to advoid the invalidation of anti water ability and change of resist pull.

Factory information:

Customer visiting: