Name: 2015 Automatic Control PP sediment filter cartridge making machine
Brand: ANGE
Availability: InStock

Product Details

PP Spun Filter Cartridge Making Machine:1E&1M,2E&2M,3E&3M

OUR PRODUCTS

FILTER CARTRIAGE IS FREE TO CUSTOMSIZE

PP Melt Blown/Spun filter cartridge machine - Pramameters

Production Capacity

Mode	Throughput	Output
1 Extruder	15~18kgs/hour	1800~2400pcs/24hrs
2 Extruders	30~36kgs/hour	3500~4800pcs/24hrs
3 Extruders	45~54kgs/hour	5000~6000pcs/24hrs

Note:

1. Capacity calculated based on the basis of PP filter 10'',ID= 28mm,OD=55~57mm
2. Production capacity is related to the temperature of workshop, keep workshop temperature between 10~25 degree, production capacity will be stable

Total Installed Power

Mode	Power
2Extruders	53kw/hour
3Extruders	68kw/hour

Running Power

Mode	Power
2Extruders	25~30kw/hour
3Extruders	35~40kw/hour

Raw Material

100% New Polypropylene-melt flow index(MFI) 230℃/2.16KG

Internal Diameter

28mm default (free to customize)

Outer Diameter

40~120mm (free to customize)

Length

5",10",20",30" ~85’’ largest at present (but free to customize)

Filter Precision

1μm, 3μm, 5μm, 8μm, 10μm, 13μm, 15μm (refer to NSF certification site or use “Filter Rating Testing Bench” to verify)

Surface of Filter

Smooth surface(needs extra tool)

Orange peel surface(needs extra tool)

Micro-grooving surface(needs extra tool)

Groove surface(needs grooving machine)

Dotted surface(needs extra tool)

Logo on surface (needs carving machine)

Default voltage

3 phase 380V (50HZ/60HZ) or 1 phase 220V (50HZ/60HZ) If you need other voltage. Also extra $500 should be charged for this change.

Occupied area

45M²Is enough, 100 M² is better

Decibel

87~105 db(in Europe some customers will make special "worm" room for these lines to avoid noise)

Machine Weight

Before Packing: ~3.3T

After Packing: ~4T

Note: The machine can continue work 10~15 full days but sometimes will have hole blocking issues. You need to remove the molds and clean it via clean oven when pressure inside of mold is large by reading the pressure meter directly on the controller.

OUR BUSINESS:

Main features of pp melt blown filter cartridge machine:

Ø Full Automatic
Ø Good appearance
Ø Manpower saving
Ø Lower electric consumption
Ø New Designed Feature

1. We have installed 2 pressure instruments between the heat oven and molds in order to read the die pressure at any time rather than just like other manufacturers by experience alone, which could easily adjusted the air pressure and thus keep the melted PP fiber within a stable uniform density, smaller pore size (the smaller pore size is, the higher filter ratio it is)

Our new design	Other manufactures

2. As you see the built-in air heater is inside below the extruder.

Our new design	Other manufactures

Ø One PP Filter Has Different Density.

2 extruders mode could produce filters in 2-layer with different material and density WHEN you set the heating temperature of 1st extruder higher than the second extruder’s temperature by 3℃, the density of PP fiber from these 2 extruders will show different micro. Similarly 3 extruders mode could have 3-layer.

·After-sales Service:

We provide 1 year warranty;

and our engineers will be available to overseas.

**We will also provide unlimited long-term technical guide by email or skype.

For Training:

--We could train your delegates(1~3person) for 7~14 days until your colleagues have known how to operate by themselves. We are responsible for eating.

--One of our engineers will go to our factory to install and teach your operators 7~10 days. Your company shall prepare air tickets(go and back) &hotel &eating when he is working and total salary is $1000.

**We suggest customers study at our factory firstly, and then our engineer goes to your factory if you still demand.

Spare parts which we supply for free

Heating loop inside of extruders	8pcs	Sensor	5sets
Heating pipe inside of air heater	2pcs	Bearing	2pcs
Temperature controller of controller	3pcs	Blade	20pcs
Button	2 each	Heating Gun	1set
Porcelain bead and line	some	Solid-state relay	2pcs
Water-oil separator for screw compressor	1set	Machine-oil filter for screw compressor	1set
Air filter for screw compressor	1set	Insulated Pipe	2pcs
Needles	40pcs	insulated asbestos	some
Filter Screen/Net	1 set

·Our Company:

ANGE is a professional manufacturer producing pp melt blown/spun filter making machine. We have independent research department to design and we excel at making new products according to clients’ special requirement.

Our clients are full of the world: India, Iran, Egypt, Taiwan, Ukraine, Turkey, Pakistan, and Thailand…

·Technical Support:

Mr. Xia- with 20 years’ experience in machine design and especially good in plastic extruding industry

Mr. Wen- with 15 years’ experience in filter making factory and can make all the filters you want

Mr. Chao- with 30 year's experience in designing PP string wound filter cartridge making machines

Optional Machine

Grooving Machine	Packing Machine	Logo Machine	Smoother

WUXI ANGE WELCOME TO YOUR VISITING~