smd5050 digital led light
USD $12 - $12 /Meter
Min.Order:1 Meter
Specification:
LED Type/brand | digital5050 Grade A(top qualilty) |
LED Quantity | 30leds/m |
Energy Rating | A |
LED Power Consumption | 9w/m |
Input Voltage | DC5v |
Colour | Dream color(ICRGB) |
Beam angle | 140° |
Operating Temp | -30°c-40 °c |
IC Chip | ws2801 |
Average life | 50,000 hours |
color | dream color |
Dimension | 1000mm(L)*14mm(W)*10mm(H) |
waterproof rate | IP65 |
Warranty | 2 years |
Certificates | CE&RoHS |
Product images:
This strip 15Pixels (IC) per 50cm,T-1000controller support 2000Pixel Max,
each unit LED bar’s power 3.6W, 5V70A(350W) works 85pcs of bar .
You also could use T4000,T8000 SD controller for more LED pixels.
our other products:
Applications:
1.The excellent light and user-friendly designs make LED strip perfect for numerous applications, such as back lights, cabinet lights, edge light, for corridor, canopy, archway, lights for path and contour marking; etc.
2.They can be a good choice for lights for hotels, restaurants, night clubs, coffee / wine bars, shopping malls,
various shops, beauty centers, lights etc
Features and Benefits:
1.Control IC included, supporting numerous ,color-change effects;
2.Pure fiber material Rigid PCB, 5V low voltage input;
4.Every 1 Led linear separable, custom-length available;
5.Control by SD card controller,DMX512 System,
6.Extremely long lifespan & lower power consumption
Transformer:
Part Number :SJ-12V-200W
Input Voltage :AC200-240V
Output Voltage: DC12V
Output Current :16A
Rating Power: 200W
Size(mm) : 215*13*9
Remark : ≤25m
ShiJi Instruction for Led Rigid Strip :
1) Qualified technicians needed for installation for our Led Rigid Strip. Specific electrical and safety
standards needed to be followed.
2) All applicable electrical and safety standards should be considered when installing the LED strips or
Related parts like power supply, LED controller and etc.
3) 1 SD Controller support 8000 pcs IC (500m). Software :Lededit.(free offer)
4) The conducting paths on the flexible PC board should not be
damaged during assembly. The strip and all components on it
should not be mechanically stressed. The strip may be curved
around small radii provided there are no LED components on
the bend and the force does not crease the strip. The strip
should be secured down immediately to avoid fatigue and breakage.
5) Proper power supply should be needed to feed the Led strip.