Product Details

3ML Prefillable Syringe Rigid Luer Lock

Product Description

1.Production Description

Prefilled Syringe and Dental Cartridge and new high-tech products of our company.It is the first in China.There products are mainly applied to the fields of gene engineering bioengineering,insulin and such industries.

[Product Name]

Prefilled Syringe, there are two typical forms

v Form 1: With needle: Prefilled syringe with needle staked

v Form 2:Without needle: Prefilled syringe with luerlock.

[Product Features]

v Lower overfill, which helps to reduce costs and maximize yield

v Enhanced differentiation

v Greater efficiency

v Increase patient compliance

v Ease of use and convenience for healthcare professionals and patients

v Reduce risk of dosage error and contamination

[Product Structure and Morphology]

The structure of Prefilled syringe with needle staked

Needle Shield or

Rigid needle Shield

Staked needle

Syringe barrels

Rubber plunger

Plastic rod

2.Products Sterilization Methods

Sterilization Equipment Validation report

1)- Products sterilization methods

Put the Products in cartons and pack on the pallets for final sterilization, using epoxy ethane gases to sterilize. our company uses the mixture of ethylene oxide and carbon dioxide gas , 70% carbon dioxide mixed with 30% epoxy ethane, which is on the premise of the sterilization effect and ensure the safety performance. control the Sterilization dose at about 500 mg/L and the humidity at about 70%;first preheat, humidification, vacuumize the autoclave cabinet before add in epoxy ethane gases, to achieve a set of sterilization temperature, humidity, and ensure the uniform and the actual time of the ethylene oxide sterilization is 8 hour. After the sterilization, absorb and discharge the ethylene oxide and clean the products with clean air and replacement , guarantee the minimum quantity of ethylene oxide residues. The whole process of sterilization operation is around 12 hours. After the sterilization, in order to further reduce ethylene oxide residues of products,which require 7 days parsing of natural ventilation. The sterilization equipment of our company is the “13 m³ethylene oxide sterilization cabinet”from “hangzhou dianda sterilizing equipment”

2)- Sterilization equipment validation report

Each year, The Quality assurance department, Quality control department and The Workshop have validation to “ethylene oxide sterilization” ,Including the performance of the equipment, automatic control, non-load temperature distribution, full-load temperature distribution, vacuum leak test and so on to ensure the effect of sterilization validation. In order to ensure the effectiveness of sterilization, Validation method combined with challenging test with half cycle method, Under the condition of fixed with the dose, temperature, humidity and pressure for validation of the sterilization time; Validation sterilization time is 4 hours can reach the requirements of killing bacillus subtilis spores black variant (ATCC9372) . At actual production, to use of the sterilization validation dosage, temperature, humidity, pressure and the time will be twice times of validation time,it means 8 hours.

Appendix: validation report of challenging test, 2013

Sterilization Validation report

Packaging & Shipping

Our Services

About Sample:

1.We can produce the glass bottle based on your sample vial.

2.we can make samples first before mass production. And the samples will be finished according to your request ,such as printed color ,printed logo ,printing design ,etc.

3.We can send you free ex-stock samples bottles for checking while the samples' freight is collected .

4. We have stock,send you the bottles fastly.

10ml glass bottle, blue glass bottle,dropper bottle

About Ex-Stock Supply:

Ex-stock supply for glass bottles ,fast delivery .

The MOQ for ex-stock supply is 10000 pieces while customized order is 300000 pieces.

10ml glass bottle, blue glass bottle,dropper bottle

About the Color of glass bottle:

For ex-stock glass dropper bottle ,we have many color for option ,such as clear ,amber,blue and green .

0ml glass bottle, blue glass bottle,dropper bottle 10ml glass bottle, blue glass bottle,dropper bottle

About Printing Way and Surface Handing :

Screen Printing and Hot Stamp Printing

Glossy and Matt/Frosted.

Company Information

Shandong Pharmaceutical Glass Co.,Ltd is one of the largest manufacturers of pharmaceutical pakaging in China,established in 1970 wth a registered capital of approximate USD42.3million.We possess the most advanced manufacturing technology and expertise in this field.Our products cover various containers used for antibiotics,Medical glass tubes,Ampoules,Tube vials for antibiotics,Amber glass bottle,food and cosmetic bottles,Infusion bottles,Butyl rubber stoppers,Al-plastic multi caps,Prefillable-syringe,Dental galss cartridge and PP stoppers for soft infusion bags.

The range covers eleven major series of 1000 kinds of products with differing specifications.Among them our moulded glass vials and bottles are in conformity with USP Type I,II,III.The annual production of our leading products reaches more than 9 billion pieces.Our products are sold to more than 1000 pharmaceutical manufacturers here in China,including many provinces,cities,autonomous regions.We also export to further field in world.Our products can be found in USA,Indonesia,Thailand,Philippines,Pakistan,India,Middle East,England,Netherlands,Brazil,Nigeria etc.

Our company has been the leader in Pharmaceutical glass packaing in China by passing both the ISO9001 Quality Management System Certification,and the ISO14001 Environment Management Authentication.

Since June 3rd 2002,our company has been listed in Shanghai Stock Exchange with 32 million A shares.Up to now,the value of our share is quite buoyant with upward tendency.We are confident to say that we have opened a new chapter for the prosperous development of our company.

FAQ

Why Choose Us :

1. Providing free design service and free sample for you to test.

2. OEM service: we can make customized bottles based on your samples bottle or drawing.

3. Custom service and multiple choice for meet different custom demand ,such as the color ,size ,capacity, printing craft,printed color of the vial.

4.Fast delivery: about 25days according to the order quantity after payment.

5. Prompt reply your email or inquiry within 24 hours

6. Providing matched sealing parts for vials ,such as caps, sprayers, glass dropper, rubber stopper and so on.

7. From Planning,Design ,Manufacture,Printing,Filling,Packaging and Shipments of through-train services

10ml glass bottle, blue glass bottle,dropper bottle

Payment Terms :

T/T,L/C

10ml glass bottle, blue glass bottle,dropper bottle

What We Sell :

1, Clear and Amber Moulded Injection Vial for Antibiotics,USP Type I,II,III.

2, Infusion Bottles.

3,Bottles for Beverage,Perfune and Foodstuffs.

4,Amber Glass Bottle.

5,Prefilled syringe and Dental Cartridge.

6,Ampoule & Tube Glassing.

7,Tubular Vial for Antibiotics.

8,Plastic Bottle.

9,Butyl Rubber Products.

10,Al-Plastic Multi-Cap.

How to Buy:

1.Details of Glass bottle

Please tell us the necessary information for quote,such as the size,capacity,color and order quantity of the vial you want.

If the glass bottle is with lable printing,pls show us the printed graphic or design for quote correctly.

2.Quotation

It is better to quote based on the original sample or printing design.

3.Design File

Please send us the design file in Al,CDR,PSD,PDF or JPG format and the DPI more than 800,as much clear as possible

4.Confirm Printing Design

Our designer will finish the printing design according to your request and based on your design file.

Only after we confirming the design with each other and payment,then we will start the production based on the confirmed design or sample

5.Sample Production

We can produce sample first according to your request and you place the order after checking the sample.

6.Payment

30%deposit first,or full payment one-time

7.Deliver

After finishing the production,we will send you photos for reference befoe delivery.And then after the final payment,we will arrange the delivery as our negotiation.

Certifications