UF-06A/AB-I

Main specifications:

Maximum input power: 6.6KW

Oscillating frequency: 200-500KHz

Maximum input current: 30A

Input voltage: 220VAC single phases, 50 or 60Hz

Duty cycle: 100%

Cooling water: ≥0.2Mpa 2-5L/min

Auto heating time: 0.1-99.9seconds

Auto retaining time: 0.1-99.9seconds

Auto cooling time: 0.1-99.9seconds

Weight and dimension:

Main characteristics:

1. With high frequency up to 500KHZ the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
2. IGBT and current inverting technologies have been used; higher reliability and lower maintenace cost.
3. 100% duty cycle, continuous working is allowed at maximum power output.
4. Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5. Display of heating power and heating current and oscillating frequency.
6. Simple to install , installation can be done by unprofessional person very easily;
7. Light weight, small size;
8. different shape and size of induction coil can be changed easily to heat different parts.
9. Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.
10. the separated small heating head is especially suitable for the applications in which the parts are stationary and the heating head is moved to fit the place.

Main applications:

1. brazing of the saw tips  2. heat treatment of small parts  3. Quenching of the saw tip

4. Shaping of the small driller  etc.

...