UF-100AB

Main specifications:

Maximum input power: 100KW

Oscillating frequency: 30-150KHz

Maximum input current: 150A

Input voltage: 3phases 380VAC, 50 or 60Hz

Duty cycle: 100%

Cooling water: ≥0.2Mpa 10L/min

Auto heating time: 0.1-99.9seconds

Auto retaining time: 0.1-99.9seconds

Auto cooling time: 0.1-99.9seconds

Generator Weight: 94KG

Generator size: 760x400x880mm

Transformer weight:28KG

Transformer size: 510x300x450mm

Packing weight: 182KG

Packing size: 880x820x990mm

Main characteristics:

1. With high frequency up to 150KHZ , and very thin and tiny parts can be easily heated.
2. IGBT and current inverting technologies have been used; higher reliability and lower maintenace cost.
3. 100% duty cycle, continuous working is allowed at maximum power output.
4. Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5. Display of heating power and heating current and oscillating frequency.
6. Simple to install , installation can be done by unprofessional person very easily;
7. Light weight, small size;
8. different shape and size of induction coil can be changed easily to heat different parts.
9. Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

Main applications:

Quenching of shaft

Quenching of gear

Brazing of copper bars

Heating of bullet shell

Floating melt with water cooled crucible

Annealing of wire continuously

Etc.

...