UF-10A -I

Main specifications:

Maximum input power: 10KW

Oscillating frequency: 50-300KHz

Maximum input current: 15A

Heating current: 3-25A

Input voltage: 3phases 380VAC, 50 or 60Hz

Duty cycle: 100%

Cooling water: ≥0.2Mpa 5L/min

Auto heating time: 0.1-99.9seconds

Auto retaining time: 0.1-99.9seconds

Auto cooling time: 0.1-99.9seconds

Weight: 30KG

Dimension:580x260x500mm

Packing weight: 42KG

Packing size: 680x360x600mm

Main characteristics:

1. With high frequency up to 300KHZ the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
2. IGBT and current inverting technologies have been used; higher reliability and lower maintenace cost.
3. 100% duty cycle, continuous working is allowed at maximum power output.
4. Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5. Display of heating power and heating current and oscillating frequency.
6. Simple to install , installation can be done by unprofessional person very easily;
7. Light weight, small size;
8. different shape and size of induction coil can be changed easily to heat different parts.
9. Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

Main applications:

1. heat treatment of gear and shaft
2. steel and stainless steel screw coating
3. floating melt for institute or college research
4. tiny or powder material melting
5. copper joint brazing
6. etc.

...