OPT-GY1014M02,4* 10/100M RJ45 Port+1*FX Port Industrial Ethernet Switch
Negotiable /Piece
Min.Order:10 Pieces
Xiamen Wellzion Electronics Co., Ltd.
OPT-GY1014M02,4* 10/100M RJ45 Port+1*FX Port Industrial Ethernet Switch
TheOPT-GY1014 series are Optone new ultra low power consumption Green Ethernetseries, its full load power consumption is as low as 2.16 watts.The OPT-GY1014 switches supports a wide operating temperaturerange from -40°C to 85°C. All models have IP40 protection class and meet EMCindustrial level 4 requirements.
OPT-GY1014series support IEEE 802.3 and IEEE802.3u with 10/100M full/half-duplex, MDI/MDI-X auto-sensing. The OPT-GY1014switches provide 12~48VDC power supply. These switches are specially designedfor harsh industrial environments certified by UL508 and UL Class 1 Div 2certifications.
OPT-GY1014is a "green", embedded industrial Ethernet module with low-powerconsumption. It is applicable to wind power, subway PIS, power SCADA, sewagetreatment, metallurgy, intelligent transportation, rail transit, and many otherindustries.OPT-GY1014 Embedded Ethernet Switching Module can be directlyinstalled in the target device.
Model No. | Description |
Double Fiber Media Converter | |
OPT-GY1014M02 | 100Base-Fx to 4*10/100Base-Tx, Multi mode, 2Km, SC/ST |
OPT-GY1014S20 | 100Base-Fx to 4*10/100Base-Tx, Single mode, 20Km, SC/ST |
WDM Fiber Media Converter | |
OPT-GY1014W20 | 100Base-Fx to 4*10/100Base-Tx, Bi-Directional, 20Km, SC/ST |
Interface | Ÿ4 x Ethernet port (RJ45) 10/100Base-Tx |
Ÿ1 x Optical port (1x9) 100Base-Fx | |
Optical Port | |
(Available for 1310nm and 1550nm Single mode, and 1310nm Multi mode) | |
Transfer Distance | up to 120km |
Connectors | SC/PC, ST/PC, optional |
Fiber core | 8.3μm, 8.7μm, 9μm and 10μm onsingle-mode fiber; 50, 62.5 and 100μm on multi-mode fiber |
Ethernet Port | |
Standard | IEEE802.3, IEEE802.3u, IEEE802.3x |
Available Speed | force 10Mbps,force 100Mbps andauto-detective 10/100Mbps Full-Duplex and Half-Duplex auto-negotiation |
Connectors | RJ-45 Connector; MDI/MDI-X connectionauto-sensing |
Switch Properties | |
MAC Table | 2K |
Packet Buffer | 1Mbit |
Switching Delay | <5μs |
LED Indicators | ŸPower, Status, Speed, FX Link/Act, TX Link/Act |
Power Requirement | |
Input | 12VDC~48VDC |
Consumption | 3.5W |
Overload Protection | Support |
Reverse Connection Protection | Support |
Redundancy Protection | Support |
Physical Characteristics | |
Housing | Metal enclosure |
Protection Class | IP40 |
Dimensions | 36mm*120mm*103mm |
Weight | 0.4kg |
Installation | DIN-Rail or Panel mounting |
Environmental Limits | |
Operating Temperature | -40°C to 85°C |
Storage Temperature | -40°C to 85°C |
Operating Humidity | 10% to 95% RH (non-condensing) |
Storage Humidity | 5% to 95% RH (non-condensing) |
Agency Approvals | ŸFCC Part 15 of Class A & CE approved |
Industrial Standard | |
EMI | FCC/CE/LVD/EMC |
EMS | |
IEC61000-4-2 (ESD) | ±8kV (contact), ±15kV (air) |
IEC61000-4-3 (RS) | 10V/m (80MHz-2GHz) |
IEC61000-4-4 (EFT) | Power Port: ±4kV;Data Port: ±2kV |
IEC61000-4-5 (Surge) | Power Port:±2kV/DM, ±4kV/CM; Data Port: ±2kV |
IEC61000-4-6 (CS) | 3V (10kHz-150kHz); 10V(150kHz-80MHz) |
IEC61000-4-16 (Common mode conduction) | 30V (cont.), 300V (1s) |
Shock | IEC 60068-2-27 |
Free Fall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Warranty | 5 years |