MOS-620CT,Analog Oscilloscope 20MHz Bandwidth

MOS-620CT,Analog Oscilloscope 20MHz Bandwidth

Negotiable /Piece

Min.Order:1 Piece

Supply Ability:
1000 Piece / Pieces per Month
Port:
xiamen
Payment Terms:
Credit Card

Quick Details View All >

Place of Origin:
Fujian, China
Model Number:
MOS-620CT

Xiamen Wellzion Electronics Co., Ltd.

Business Type: Trading Company
Xiamen Fujian China
Main Products: Power Supply ,Oscilloscope ,Multimeter ,Spectrum Analyzer ,Temperature Test Instruments

Product Details

Specifications

Build-in Component Text Operating
20MHz/40MHz/50MHz Dual Channel
10 times sweep magnification
TV Synchronization,X-Y mode

 

Function & Benefits
  • High luminance,internal graticule CRT
  • Japanese electronic encoder,light,handy and reliable
  • Fully sealed long live vertical mode switch
  • ALT Triggering Function. Two indepen dent signals
  • Simultaneous observation
  • Build-in Component Text Operating
  • 20MHz Bandwidth Dual Channel
  • 10 times sweep magnification
  • TV Synchronization,X-Y mode
Specifications

 

ModelMOS-620CTMOS-640CTMOS-650CT
Vertical Axis
Frequency bandwidthDC~20MHzDC~40MHzDC~50MHz
Rise timeApprox.17.5nsApprox.8.75nsApprox.7ns
Sensitivity5mV~5V/DIV,10 steps in 1-2-5 sequence
Vernier Vertical sensitivityTo l/2.5 o r less of panel-indicated value.
AC couplingLow limit frequency10Hz. (With reference to 100KHz, 8DIV. Frequency responsewith-3dB.)
Input impedanceApprox . lMohm //Approx.25pF
Linear ityAdjustable on panel
Vertical modes≤± 0.l DIV of amplitude change when waveform of 2 DIV at graticule center is moved vertically.
DC balance shiftCHI :CHl single channel.
CH2 :CH2 single channel.
DUAL :CHI and CH2 are displayed. ALT or CHOP selectable at any sweep rate.
ADD:CH1+CH2 algebraic addition.
Chopping repetition frequencyApprox.250kHz
Input couplingAC, GND, DC
Maximum input voltage400V (DC+AC peak),AC:freq uency lkHz or lower.
Common mode rejection ratio50:1 or better at 50KHz sinusoidal wave(When sensitivities of Ch1 and Ch2 are set equally)
Isolation between channels
(At 5mV/DIV range)
>1000:1 at 50KHz
>30:1 at 15MHz>30:1 at 35MHz>30:1 at 45MHz
CH2 INV BALBalanced point variation:≤1DIV (Reference at center graticule)
Triggering
Triggering sourceCH1,CH2,LINE,EXT,ALT
Coupling: AC20Hz to full bandwidth
SLOPE+/-
Sensitivity20Hz~2MHz:0.5DIV, TRIG-ALT:2 DIV, EXT:200mV
2~20MHz:1.5 DIV2~40MHz:2.5 DIV2~50MHz:3.0 DIV
TRIG-ALT:3DIV, EXT:800mV;  TV: Sync pulse more than 1 div(EXT:l V)
Triggering modesAUTO,NORM,TV-V,TV-H
EXT triggering signal input
Input impedance
Max.input voltage
Approx:1MΩ/approx.25pF;
400V (DC+AC peak), AC: Frequency not higher than 1KHz
Horizontal System
Sweep time0.2uSec~0.5Sec/DIV,20steps in 1-2-5 sequence
Sweep time accuracy±3%
Vernier sweep time control≤1/2.5 of panel-indicated value
Sweep magnification10 times
×10MAG sweep time accuracy±5% (20nSec~50nSec are uncalibrated)
Linearity±5%, xl0MAG:±10%(0.2s and1 s )
Position shift caused by ×10MAGwithin 2DIV. At CRT screen center
X-Y Mode
Frequency bandwidthDC to at least 500KHz
X-Y phase difference≤3°at DC~50KHz
SensitivitySame as vertical axis. (X-axis:CH1 input signal; Y-axis:CH2 input signal.)
Calibration Voltage
WaveformPositive-going square wave
FrequencyApprox. 1kHz
Duty ratioWithin 48:52
Output voltage2Vp-p±2%
Output impedanceApprox.1KΩ
CRT
Type6-inch rectangular type, internal graticule
PhosphorP31
Acceleration voltage Approx.2KV(20MHz)/Approx.12kv(40MHz)
Effective screen size8×10DIV[1DIV=10mm(0.39in)]
GraticuleInternal
Trace rotationProvided
Dimensions310W x150Hx 455 D(mm)
WeightApprox.8kg

 

Contact Supplier

Ms. Melissa Zhang Chat Now
Telephone
86-592-5562446
Fax
86-592-5562446
Address
ROOM 608,B BUILDING,SEG E-MART, NO.806 YUANSHAN NAN ROAD,XIAMEN,FUJIAN,CHINA Xiamen,Fujian

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Measurement & Analysis Instruments > Electronic Measuring Instruments > Oscilloscopes
Categories
Hi~