laser hair removal machine price SW-217E
USD $1,680 - $2,350 /Piece
Min.Order:1 Piece
Guangzhou Sunwin Technology Co., Limited
Portable laser hair removal machine price
The e-light Treatment Principle:
E light core technology :RF+ IPL + skin cooling.
in the E light technology, the IPL energy plays a guiding role to guide RF focus on the target tissue, and strengthen
the target tissue RF absorption in the case of low light intensity . Surface contact cooling technology of the Treatment
probe to eliminate the thermal effect caused due to light is too strong and to increase the impedance of the epidermis ,
reducing the epidermal absorption of RF energy , so that curative effect and safety are greatly improved, and the target
tissue of light color as effective.
The e-light treatment applications :
1,Rejuvenation: improve the forehead, face, arms, abdomen, legs and other rough skin, enhance skin elasticity,
whitening tender
2,Hair removal: armpit hair, beard, hair, limbs, Bikini bob line etc affect the beauty hair
3,Dispel spot: freckles, chloasma, freckle, chloasma, sunburn, senile plaque dermal patches, birthmarks and partial
pigmentation
4,Acne removing: facial, shoulder, chest, waist, buttocks and other parts of bacterial acne
5,Dispel capillary vessel: congenital capillary vessel, capillary vessel after change skin , red face, erythema, skin
allergies and sensitivities.
E light Specifications:
E light | IPL+ Bipolar RF+ Water cycle refrigeration |
E light energy | 10-50J/cm2 (IPL) 10-50J/m2 (RF) |
E light power | 1600W |
IPL light energy | Tender skin and Acne : 560-1200nm Dispel capillary vessel and Dispel spot: 530-1200nm Hair removal: 640-1200nm |
RF Output model | Bipolar RF |
RF power | ≤50w |
RF Band | 500ms-9500ms |
IPL spot | 8x40mm |
IPL gun head | 50000 times |
IPL Discharge interval | 3-5sContinuous adjustable, step 1 second |
IPL Pulse number | 1-6T |
IPL Pulse cycle | 1-4S |
IPL Pulse width | 1.0-9.9ms, 0.1ms step |
IPL Pulse interval | 05-99ms, 5ms step |
Cooling mode | Closed loop forced water cooling, Air-source heat exchange, Semiconductor refrigeration |
Advantage :
1. Most advanced technology: E-light technology= IPL+ Bipolar RF+ Water cycle refrigeration
2. Wide range of treatment, great effect, and with high safety factor, Greatly effective to unwanted hair removal,
both thick black hair and tiny hair, and comfortable during the treatment
3. Easier installation: Plug-and-play connectors
4. Super Long working time: More powerful cooling system (air + water + semiconductor).
5.No side effects, good effects,high effective
6..The cooling system make comfortable and safe during the operation
7. Modular design of inner structure ensures the working system more stable, and emergency stop switch ensures
safe operation
8. RF energy can be applied to any type of skin, used in deep colour skin or light colour hair
9. LCD Touch Screen
10. Five languages software system
11. Self-identification parameter system
12. Self-detection System
13. Intelligent skin-protection system.
14.Intelligent operation system( IOS technology)
15. Multi-function within one System
E light project operation steps technique:
Freckle removal:
1,clean the skin,
2,The operating parts uniform daub cool gel.
3, head operation in E light 530 wave band (head close to the skin epidermal luminescence, Operate close to the skin spots on parts)
4,more than three times back and forth luminous, until seeing pigment deepen ,pigment extraction to the epidermis is the best.
5, uniform daub a thick layer of cool gel,after 10 minutes,you could clean it. (smear repair growth factor)
Hair removal:
1, trim hair (1-2 mm)
2, clean
3, The operating parts uniform daub cool gel. .
4, head operation in E light 640 wave band (close to the skin hair parts to luminescence.)
5,more than three or five times back and forth luminous, until seeing Hair roll and focal taste, is the best.
6, daub a thick cold gel ,about 10 minutes ,you can clean it (daub repair growth factor)
Skin whitening :
1, clean operating parts
2, daub cold gel
3,head operation in E light 560 wave band (close to the skin epidermis and luminescence) from chin to cheek ,from cheek to forehead, hit back and forth, more than three or five times back and forth luminous.
4, daub a thick cold gel , you can clean it after 10 minutes(daub repair growth factor)
Remove acne:
1, clean operating place
2, daub cold gel
3, head operation in E light 560 wave band (close to the skin epidermis and luminescence) from chin to cheek ,from cheek to forehead, hit back and forth, more than three or five times back and forth luminous.
4, Acne reddish effect is the best.
5, daub a thick cold gel,after 10 minutes, clean it (daub repair growth factor)
Desalt red blood silk:
1, clean operating place
2, daub cold gel
3,head operation in E light 530 wave band (close to the skin epidermis and luminescence)from chin to cheek ,from cheek to forehead, hit back and forth, more than three or five times back and forth luminous.
4, red blood silk areas become red or red purple is best.
5, daub a thick cold gel,after 10 minutes ,clean it(daub repair growth factor)
Products Details:
SIMILAR ITEMS YOU MAY LIKE:
Comparision:
Certificate:
Company Information:
1-When you receive the package:
Please check the package carefully when you received it,if you found the package were broken,you
should refused to accept it and take some picture on the package and then insaide machine, if the
machine was broken,we will ask the freight company for compensation,and help you with the machine.
2- About the transportation:
you can choose the shipping way you like,such as DHL,UPS,EMS...,OR By air,by sea.if you have your
own forwarder in China,we can send the goods to them,and your own forwarder will help you delivery
the goods to you. We will help keep track the goods and inform you.
Welcome to contact us!