AOKE DCZ50 series paper box cutting machine
Brief Introduction:
Four tools include oscillating knife tool, drag knife tool, creasing tool, plotting pen.
Carton and box can reach to perfect cutting performance
Convenient half cut set to achieve perfect half cutting performance
Safety guard system is equipped to avoid injury
Brunt model sold well in EU and USA market
Specifications
Model | DCZ502516 | DCZ501713 | DCZ501310 |
effective cutting area | 2500*1600 | 1700*1300 | 1300*1000 |
configuration | Oscillating blade,drag knife,pen,creasing tool | ||
Max speed | 1000mm/s | ||
Max cutting thickness | 15mm | ||
smallest cutting diameter | 6mm | ||
Precision | ≤0.1mm | ||
Voltage | 220V±10% 50HZ | ||
Option | Video registration system | ||
Knife tool
No. | Photo | name | application | Note |
1 |
| 16 degree knife | Used to cut materials between 10mm to 15mm thick. Cutting materials: corrugated board, paper board, Kraft paper, gray board, offset board, honeycomb board, KT board and compound materials, etc. |
|
2 |
| 20 degree knife | Used to cut materials between 7mm to 10mm thick. Cutting materials: corrugated board, paper board, Kraft paper, gray board, offset board, honeycomb board, KT board and compound materials, etc. |
|
3 |
| 26 degree knife | Used to cut materials between 5mm to 7mm thick. Cutting materials: corrugated board, paper board, Kraft paper, gray board, offset board, honeycomb board, KT board and compound materials, etc. |
|
4 |
| 39 Degree Drag knife | Used to cut materials within 3mm thick. Cutting materials:paperboard, Kraft paper, gray board,offset board, self-adhesive paper and compound materials, E corrugated etc. |
|
5 |
|
Special knife | Used to cut materials within 2mm thick cutting materials:paperboard, Kraft paper, gray board,offset board and self-adhesive paper,etc. |
|
6 |
|
Foam knife | Used to cut foam and other soft materials less than 60mm thick. |
|
7 |
| V cut knife | Used for making V groove on the Honeycomb board and grey board |
|
8 |
| Grey board V cut knife | Used to making V groove on the grey board to make the gift box. |
|
9 |
| Double edge knife | Mainly for the thick and hard materials such as grey board, PP etc. |
|
*10 |
| 30 degree knife | Mainly for the hard material such as carbon gasket, gasket, ruber, grey board, PP etc. | Option |
Creasing wheel
No. | Photo | name | application | Note |
1 |
| 3mm creasing wheel | creasing thickness: between 3mm and 5mm corrugated board. |
|
2 |
| 5mm creasing wheel | creasing thickness: between 5mm and 7mm corrugated board. |
|
3 |
| 7mm creasing wheel | creasing thickness: between 7mm and 10mm corrugated board. |
|
4 |
| 2mm creasing wheel | creasing thickness: within 2mm,such as corrugated board, paperboard, Kraft paper, gray board,offset board, composite materials etc. |
|
*5 |
| PVC creasing wheel | Used for PVC, plastic box, PVC corrugated etc. | Option |
*6 |
| Double line creasing wheel | Creasing thickness between 10 mm to 15mm 3A corrugated paper. | Option |
Pen
No. | Photo | name | application | Note |
1 |
|
Pen | Drawing |
|
