Product Details

Wire Rope Electric Hoist of Hot Sale Electric Hoist

	1. Name: CD1,MD1Electric Hoist 2. Feature: CD1 Wire rope Hoist is a small-sized lifting equipment, which can be mounted on single beam, bridge, gantry and arm cranes. Model CD1 Electric Hoist has only one normal speed, which can satisfy normal application. Model MD1 Electric Hoist provides two speeds: normal speed and low speed. At a low speed, it can do precise loading and unloading, mounding of sand box, maintenance of machine tools, etc.
	1. Name: Low Headroom Electric Hoist 2. Feature: The low headroom wire rope electric hoist is improved from CD & MD type electric hoist, the working condition same as CD & MD type wire rope electric hoist, but it increases more clean lifting space, you can save more construction cost of workshop.
	1. Name: Metallurgical Explosion-proof Hoist 2. Feature: Metallurgical Explosion-proof Hoist is the ideal light metallurgy Lifting equipment that can be used in metallurgical single beam matched with this type, and can also be installed in the workshop fixed hanging rail used alone.
	1. Name: Wire Rope Explosion Proof Electric Hoist 2. Feature: Explosion-proof electric hoist is a kind of small-sized lifting equipment which is small volume, light weight, huge lifting capacity. When workshop filled with explosive mixture, in order to ensure safe premise, Explosion-proof electric hoist is necessary and favorable equipment to improve labor conditions and labor productivity.

Technical Parameter of Wire Rope Electric Hoist

Model

0.25Ton

0.5Ton

1Ton

2Ton

3Ton

5Ton

10Ton

Capacity (Ton)

0.25

0.5

Standard Lifting Height (m)

3-9

6-12

6-30

Lifting Speed (m/min)

8(8/0.8)

7(7/0.7)

Travel Speed(m/min)

20/30

Wire Rope Type

6*19-3.6

6*37-4.8-180

6*37-7.4-180

6*37-11-155

6*37-13-170

6*37-15-200

28a-63c

1 beam track type

16-22b

16-28b

20a-32c

25a-63c

28a-63c

Loop track Minimum Radius (m)

0.8

1.5

1.5-4

2-4

2.5-5

3.5-9

Power Source

208V,220V,380V,440V,460V,480V

Applications of Wire Rope Electric Hoist

European ElectrIc Hoist

The new type European standard wire rope electric crane hoist uses German imported motor and reducer; Modular design not only enhence the reliablity of mechanism but also lower the maintanence time and cost; Its small and compact structure effectively saves the sapce of the users.

There are more speed and pulley rate to chose for the client as per their working demands. The traveling mechanism is controled by convert and the speed could reach to 20m/min, thus to have a exact positioning function and hoist the valuable objects safely and reliably.

Applications of European Electric Hoist

Other Type Products

1. Be used in crane such as steel electric single track beam, bridge, suspensio cantilever, gantry etc.

2. Advantages: Light weight, small size, compact structure, more varieties of specifications, running smoothly.

Electric chain hoist widely applied to mold, mechanical manufactur warehouse, logistics, shipbuilding, bridge construction, and other industries as well as factories and other special purposed.

Components

1. Motor: Hoist Motor is an taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently.

2.Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

3.Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition.
4.Wire Rope: Hoisting rope comply with the exporting ISO standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
5.Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting.
6.Testing: All our Hoists are tested on 125 % thus assuring safe working load and is issued with a test certificate.

Testing Stand

1. Dynamic test on 1.1 times rated capacity.

2. Static test on 1.25 times rated capacity.

Safety Measures

No.	Safety Measures	Foundation
1.	Loss of pressure fault phase protection	1. When the voltage is too low, the electricity will disconnect 2. When the phase is changes, the electricity will disconnect
2.	Over Voltage, over current protection	1. When the voltage is too big, the electricity will disconnect 2. When the current is too big, the electricity will disconnect
3.	Overload Limit Switch	1. When the lift capacity is more than the max rated lift capacity, the electricity will disconnect, crane will stop work
4.	Weight limit	1. Supervise the decrease of hook. There is a limit height. The hook cannot fall any more if reach this limit
5.	Fire limit	1. Supervise the up and down limit position of Hook. Avoid the over increase and over decrease, protect hoist

Other Related Main Products

Company Profile

FAQ

• Whether you can offer customized crane?

Yep, of course, we are manufacturer, and we have our own engineer group. They can work out customized design according to your requirement. The most important thing is that you tell us what you need.

• Whether there is professional technician assist our installation?

Yep. We have professional installation team, who have gone to many countries to assist the installation. If you need we send technician to your factory, please let us know in aadvance. So that we can arrange technicians.

•Can you help us arrange the shipment?

Yep. We have professional and independent Logistics & Document Department. They will be resbonsible for arranging the logistics. Just conmmunicate with our sales about the destination port.

• If I need the crane very urgent, what should I do?

Please let us know this before making order, then we can try our best shorten our production period, and prioritize your crane's production.

• Whether you can offer the matched spare parts?

Yep, as crane manufacturer, we offer all the related spare parts, such as motor, hoists, drums, wheels, grabs, hooks, rails, travel beams, enclosed bus bar etc.

• How can you ensure the quality?

Before delivery, every products will be made test, and we will send you the quality certification. You are also warmly welcomed to come to our factory to make inspection.

• Can I visit your factory?

Of course, you can come to make visit any time. Just let us know in advance, so that we can arrange people pick you up.