Product Details

Product Description Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

The highway Bridge –erecting Crane is designed for highway and railway.

It is mainly used for hoisting (lifting) of concrete girder in bridge construction (bridge building) of general railway and highway.

Launching gantry is large bridge construction equipment which can install precast girders span by span for highway bridge.

With unique and reliable girder structure, the launching gantry allows air current to pass through the hole as it works high above the ground, thus greatly reduce wind impact on main girder, quite safe.

Technical Parameters Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Span(m)	30
Lifting Capacity(t)	165
Cart Moving Speed(m/min)	4-8
Trolley Moving Speed(m/min)	2.75
Trolley Lifting Speed(m/min)	0.5
Central Distance Between Two Girder(m)	3.4
Machine Gauge(m)	1.435
End Cantilever Deflection(mm)	630
Middle Girder Deflection(mm)	38
Max Wind Force(grade)	≤6
Curvature Radius(m)	≥700
Longitudinal Gradient	≤±2%
Transverse Gradient	≤±2%
Self-weight(t)	160
Power(kw)	150

Parts Introduction Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Main Features and Advantages Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

The first domestic creating is triangle beam, it has many advantages, such as light weight, high stiffness, low deflection, and high wind-resistance .

Unique steel pin connection, which is not only firm, but also easy to install.

Flexible steel legs, convenient to disassemble and transfer.

The frequency-converter can be installed according to user's requirements.

The span can be within 60 meters, the height of hoisting is under 20 meters, the weight of hoisting is under 200 tons per hoist.

It is widely used in highway and railway construction.

Tonnage Customize ,Industrial Customize.

Our Other Type Bridge Girder Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Upstroke Moving Carrier Bridge Girder Launcher Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Segment Assembled Bridge Girder Launcher Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Process Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Project Photos Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Related Main Products Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Rubber- tyred container gantry crane

•Rubber-tyred gantry crane is called field bridge.

•Supported on the 4, 8 or 16 large tubeless tires.

•Round numbers are based on site-round pressure requirements and design,

•Carts travel mechanism are four-wheel or two-wheel drive.

•Prevent collisions between each other cranes and gantry crane, with manual correction system and carts corners fenders.

•When lifting is too large, usually increasing the number of ways to reduce wheel pressure.

Related Main Products Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

Company Profile Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

After –sale Services Of Cross-tunnel Fixed Position Hoist Type Bridge Girder Erector TJ900S

1.12 months warranty.

2.Exclusive engineer support at any time.

3.Providing free quick- wear part.

4.We can provide free training end-users.

5.Low charge for continue maintenance when warranty is expired.