1. Introduction

Manual wheelchair ramp can be applied for low-floor city bus, and it is installed under the side of passenger door’ step. When the bus arrives at bus station, the driver unlocks the front cover and pulls the platform of the ramp out. After the platform reaches final position, rear-end of the ramp will be raised to eliminate height of threshold of passenger door so as to ensure rear-end of the platform level up to the bus floor, convenient for wheelchair to access the bus. After the wheelchair gets on the bus, retract the platform manually.

The manual wheelchair ramp is fixed with the frame under the floor of the passenger door by4 brackets.These brackets are composed of16 bolts (M10*20) and nuts and spring washers and flat washers(the diameter is 10mm).

2. Technical Parameter

3. Installation Requirement

                  Min space required to install ramp                                                                      unit: mm