High speed paddlewheel aerator for prawn pond
USD $200 - $300 /Set
Min.Order:20 Sets
Jinhu Xiaoqingqing Mechanical & Electrical Equipment Co., Ltd.
High speed paddlewheel aerator for prawn pond
Paddle Wheel Aerator is normally used in shrimp or fish ponds for increasing dissolved oxygen and improving the quality of water, which can prevent fish and shrimp from dying because of oxygen shortage. Meantime, Paddle Wheel Aerator could improve the living condition of fish and shrimp , increase cultivation thickness and speed up the growth of fish and shrimp . It is a necessary machine for aquaculture.
Specification:
Model | HP | Phase | Voltage | Cover Area | Oxygen Transfer | 20/40/40H Load |
YC1.5 | 2 | 3 | 380V~440V | 0.49-1.65acre | 2.6kg/h | 55/130/140 |
Main Parts:
No. | Item Name | Quantity | Reference | Function |
1 | Motor | 1 set | 2HP, cast iron body with 100% copper wire | Provide power |
2 | Reducer | 1 set | Arcuate-bevel gear, cast Iron body, ratio 1:14 | Transfer the power speed |
3 | Float | 3pcs | Virgin HDPE, UV and chemical resistance, high strength 320x190x1760mm | Support the machine on water |
4 | Impeller | 4pcs | New PP, 210x640mm | Lift substantial splash into air and make strong water waves and flow |
5 | Shaft | 2pcs | 304# Stainless steel, 25x760mm | Transferring the force |
6 | Frame | 1pc | 304# SS, 1550x765x30mm | Support and fix the machine |
7 | Motor Cover | 1pc | Virgin HDPE, UV and chemical resistance | Protect motor |
8 | Bush Bearing | 2pcs | Nylon with hard-wearing sleeve | Support the shafts |
9 | Movable Joint | 2pcs | SS and rubber, 110x110mm | Connect shaft and gear axle |
10 | Screw And Nut | 1bag | SS | Connect and fix parts |
Feature:
1.High efficiency and saving over 20% electric energy than traditional models.
2.Mechanical seal is available to against oil leak pollution.
3.Built-in protector is available to avoid motor being burnt accidentally.
4.The floating boat produced by our company is made of good engineering plastic. It has great buoyancy and high strength.
5.The impeller is made of nice plastic. The spoke and vane is shaped with plastic only one time.
6.The flexible gearing is fixed by the stainless wheel bolt.
7.Power efficiency is over 1.25 kg/(h·kW),more higher than the standard.
8.Oxygenation rate:2.5kg/h.
9.Outer packing:carton.
10.Easy maintenance.
11.Stainless steel frame is sturdy,without deformation and high durability.
12.Can be used both on freshwater and seawater.