Name: Supply fiber optic equipment Fujikura 80s fiber optic fusion splicer
Brand: Fujikura
Availability: InStock

Product Details

Supply fiber optic equipment Fujikura 80s fiber optic fusion splicer

Product Description

Fujikura 80S Fusion Splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc.

Fujikura 80S model is successor of the famous series of splicers: Fujikura FSM-60S and FSM-50S. The new design streamlines the steps required to complete splices, resulting in greater productivity. "Configurable automation" features allow you to customize the operation of the machine to best suit your particular splicing technique and process. Splicing takes only 7 seconds, and heating takes only 14 seconds.

The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 200 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.

Features

Splices all known types of fibers.
Fiber core alignment.
Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
Reduced splicing time – 7 seconds only.
Heating time – 14 seconds only.
Increased electrode lifetime – up to 3000 splicing cucles with one set, without splicing quality loss.
Battery life increased up to 200 full splicing/heating cycles.
Rotary color anti-glare LCD 4.73", high contrast and vividness.
Simultaneous display of X and Y axes.
May splice SC, LC, MPO connectors.
Automatic: wind-protective lid, heater, fiber holders.
Increased water, dust and shock resistance, may be used under severe environment conditions.
Automatic arc calibration.
Battery BTR-09 is included.
New comfortable carrying case, optimized for quick operation start.
The case may be used as a working table.
Operation manual is installed into the splicer.
Software update option.

Fujikura FSM-80S 70S

Fujikura FSM-80S welding machine fiber fusion splicer

Specifications

PARAMETER	VALUE
Applicable Fibers	Singlemode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Cladding Diameter	80 μm to 150 μm
Coating Diameter	100 μm to 1,000 μm
Fiber Cleave Length	5 to 16 mm
Typical Average Splice Loss	0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time	SM FAST mode — 7 seconds; SM AUTO mode — 12 seconds; AUTO mode — 15 seconds
Arc Calibration Method	Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes	100 preset and user programmable modes
Splice Loss Estimate	Based upon dual camera core alignment data
Storage of Splice Result	Last 2,000 results to be stored in the internal memory
Fiber Display	X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification	300X for single X or Y view, or 160X for X and Y view
Viewing Method	Dual cameras with 4.73 inch TFT color LCD monitor
Operating Condition	0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C

Package Contents

Fusion Splicer Fujikura 80S — 1 pc.
Detachable Battery BTR-09 — 1 pc.
Battery charge cord DCC-18 — 1 pc.
Power adapter/Charger adapter ADC-18 — 1 pc.
Power cord ACC-15 — 1 pc.
Spare electrodes ELCT2-20A — 1 pair
USB cable USB-01 — 1 pc.
Sleeve loader SL-01 — 1 pc.
Alcohol dispenser AP-01 — 1 pc.
Screwdriver SC-01 — 1 pc.
CD with Data Connection Software and Video Instruction Manual — 1 pc.
Short guide — 1 pc.
Warranty service coupon for 2 years of full warranty with the device replacement — 1 pc.
Carrying case CC-30 — 1 pc

Our main products

1. FUSION SPLICER: Comway C10; Sumitomo (T-81C); Fujikura (FSM-80S/70S/70R); Fitel S178A; INNO IFS 102.OTDR: EXFO (FTB-1/AXS-110/AXS-100/ FTB-200/FTB-500); JDSU (MTS-2000/4000/6000/8000); YOKOGAWA (AQ1200/AQ7275)
3. POWER METER (PPM-350C, FPM-300, HSV-300P); LIGHT SOURCE (FLS-300, HSV-300L); VFL (FLS-241, HSV-321); Multi Loss tester (FOT-930, FOT-302)
4. Anritsu site master S331D, S331L, S331E, S332E.
5. Fiber cleaver (CT-30A/CT-30/CT-05/FC-6S), adapter, battery, electrode, connector, fiber tool kits
6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc..
7.Maintainance and repair, calibration service for the EXFO, JDSU, Sumitomo, Fujikura, Anritsu

Our Services

After-sales Service(except consumables products):
> We guarantee all our electrical and mechanical parts for one year from the delivery date the machine running smooth in customer's place.
> We guarantee that each product is tested carefully and works very well before shipment. We strive for 100% customer satisfaction on every sale we complete.
> We are responsible for the whole lifespan of our products, and whenever you have questions during use, just call us, we are glad to offer technical support timely.

Life-long Maintenance Service:
> During the warranty period, we can repair or replace the defective parts for free.
> After the warranty time, we also repair the defective parts, but only charge part cost.