Products

% Active Chemicals

Binders

Appearance

Application Characteristics

Mixslab®ADC-75

Mixgran®ADC-75

75%

Azodicarbonamide

EPDM/EVM

Yellow slabs

Yellow granules

Mixslab® or Mixgran® ADC-75 is nitrogen blowing agent for CR, EPDM, IIR, NBR and SBR cellular rubbers. Relatively high decomposition temperature of 200°C to 210°C, makes it useful where pre-mature decomposition during processing is a hazard.  Imparts no odor to finished products.

Mixslab® OBSH-75

Mixgran® OBSH-75

75% Oxy-bis benzene

sulphonyl hydrazide

EPDM/EVM

White slabs

White granules

Mixslab® or Mixgran® OBSH-75 is Organic blowing agent for the manufacture of sponge and foam rubber articles based on natural and synthetic rubbers. It starts to decompose at around 150 °C, giving off N2. The predispersed form is supplied permits rapid and   homogeneous distribution throughout the rubber compounds.

    Mixslab® TSH-75

75% P-Toluenesulfonyl

hydrazide

EPDM/EVM

Brown slabs

Brown granules

Mixslab® or Mixgran® TSH-75 is the blowing agent for PVC and articles which based on natural and synthetic rubbers. The Blowing characteristics of TCH-75: decomposition is quite slow, the shrinkage ratio is small, and rubber articles have good tear strength. So the product is quite suitable for sponge rubber and sports shoes.