Specifications

1.width:300-2200mm
2.thickness:5-50mm
3.strength.Ver:680-3100N/mm
4.strength.Hor:265-450N/mm

RUBBER CONVEYOR BELT 

 

Polyester conveyor belts, also called EP conveyor belts, whose tension resistant body is canvas woven by polyester in warp and polyamine in transportation of materials. Because of the high initial modulus of polyester, the belts can choose a relative low safety factor.

 

 

 

Configuration:

The anti-draught body was made up of cotton canvas, nylon,polyester canvas,also be matched with top-bottom rubber cover characters.

 

Application:Belt is suitable in chemical industry,electric power,metallurgy,light industry,foodstuff machining and coal mine.

 

Technical standards:

GB/T7984-2001, GB/T10822-2003, DIN22102, AS1332,JISK6322, etc.

Specifiction/strength:

160N/mm-----3150N/mm

Width:

300mm---2000mm

The physical and mechanical properties:

1. The physical and mechanical properties of coverffig layer: please refer to the physical and mechanical properties of the common conveyer belt.
2. Tensile property of through thickness:
a. The longitudinal tensile strength is not lower than the following nominal value:
315 400 500 600 630 800 900 1000N/mm
b. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%.
c. Straightness: no more than 25mm.
d.parameters:

 

Standards		Cover Rubber			Adhesion
		Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply
DIN 22102		Mpa	%	mm3	N/mm	N/mm
					(<=1.5mm)	(>1.5mm)
DIN 22102-Z		15	350	250	3.5	4.5
DIN 22102-W		18	400	90	3.5	4.5
DIN 22102-Y		20	400	150	3.5	4.5
DIN 22102-X		25	450	120	3.5	4.5
Standards	Cover Rubber			Adhesion
	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
AS 1332	Mpa	%	mm3	N/mm	N/mm	N/mm
				(<=1.9mm)	(>1.9mm)
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6
Standards	Cover Rubber			Adhesion
	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm	N/mm	N/mm
				(<=1.6mm)	(>1.6mm)
RMA-I	17	400		3	4.4	4
RMA-II	14	400		3	4.4	4
Standards	Cover Rubber			Adhesion
	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
SANS 1173	Mpa	%	mm3	N/mm		N/mm
A	18	400	70	5		7
C	20	400	150	5		7
M	25	450	120	5		7
N	17	400	150	5		7

 

Fabric specs	Ply thickness (mm/P)	N/mm					Cover thickness
		Strength series
		2 ply	3 ply	4 ply	5 ply	6 ply	Upper	Bottom
EP-80	0.8	160	240	320	400	480	2.0~8	0~4.5
EP-125	0.85	250	375	500	625	750
EP-150	0.9	300	450	600	750	900
EP-160	0.9	320	480	640	800	960
EP-200	1.05	400	600	800	1000	1200
EP-250	1.25	500	750	1000	1250	1500
EP-300	1.35	600	900	1200	1500	1800
EP-350	1.5	-	1050	1400	1750	2100
EP-400	1.8	-	-	1600	2000	2400
EP-500	2	-	-	2000	2500	3000

If you have any questions or need more information just please feel free let me know and then we can discuss further. It will be our big pleasure if we have opportunities to be on service of you in near future. await your reply!

Welcome to inquire us.