PRODUCT DESCRIPTION:

ZWQ15-1600 heavy type sheet cutter is used to cut the web roll into flat paper. During the first paper cutting process, it can cut two paper type of length and width. The cutter’s capacity depends on the machine speed, paper GSM and the paper layer. When the paper GSM is heavy, and more tightened, the paper layer should be less. The total GSM of paper should be below than 800g/m2. The machine can be used alone and matched with unwinding stand as well as paper-receiving table produced by our factory. It can also be used together with the paper making machine. According to the driving position, this machine has two different arrangement type. When you face with the paper-out direction, it is left hand machine when the driving is on left side, vice versa.

TECHNICAL DATA:

1: Model:              ZWQ16

2: trim width:          1600mm

3: cutting deviation:          ±2mm

4: range of cross cutting length:      400-1600mm

5: working speed:      60m/min

6: diameter of upper slitting disc knife     φ150mm

7:diameter of bottom slitting disc knife    φ200mm

8: gauge             2050mm

9:length of long knife         1720mm

10:quantity of slitting knives      3 sets

11: cross cutting rotary knife quantity   2 sets

12:driving type   p4 type buncher

13: motor   YCT225-4A   11kw    1250r/min 

14: cutting weight  8 tons

MAIN STRUCTURE:

The machine consist of frame assembly, paper leading assembly, slitting assembly, two sets paper sending assembly, paper pressing assembly, two sets cross cutting, transporting, paper receiving and driving etc..

OUR FACTORY: