Driven shaft induction heating equipment WZP-120A 70KW has the following features 

Heating fast: this is the heating rate of less than 1 second (speed adjustable speed control)
Heating wide:

wide range of metal parts can be heated (according to the different shape of the workpiece replacement of removable induction loop)
Easy installation:

connect the power, induction loop and out of the water can be used; small size, light weight, easy to use
Simple operation: a few minutes to learn
Start fast: you can start with water after the heating power
Low power consumption:

high-frequency device than the old-fashioned tube about 70% energy saving, the smaller the power consumption of the smaller parts
Good effect:

the heating is very uniform (also by regulating the induction coil density, so that all parts of the workpiece to obtain their desired temperature), heating up fast, less oxide layer after annealing without waste
Adjustable power: The Promise adjust the output power
Protection all:

with over voltage, over current, overheating, lack of water and other alarm indicator, and automatic control and protection

Technical parameters of WZP-120 driven shaft induction heating equipment

Shaft induction heating equipment for hardening 

Shaft induction heating equipment for hot forging

Application of induction heating equipment:

1.Hot Forging, rolling class
1.1 The variety of hot-rolled twist drill.
1.2 standard parts, hot forging fasteners, such as high strength bolts, nuts and so on.
1.3 drill steel, tempering brazing, forging, extrusion heating.

2. Heat treatment ,hardening Class
2.1 The various hardware tools, hand tools, heat treatment. Such as pliers, wrenches, screwdrivers, hammers, axes and so on.
2.2 kinds of auto parts, motorcycle accessories high-frequency quenching. Such as: crankshaft, connecting rod, piston pin, crank pin, wheel, camshaft, valves, all kinds of rocker arm, rocker shaft; transmission of various gears, spline shafts, drive axle, a variety of small axes, a variety of fork and other high-frequency quenching.
2.3 power tools on the gears, shafts and other high-frequency quenching.
2.4 a variety of hydraulic components, pneumatic components of high frequency hardening heat treatment. Such as the piston plunger, rotor pump rotor on a variety of valves for the shaft, the gear pump gear, etc. quenching.
2.5 Heat treatment of metal parts. Such as the various gears, sprockets, all kinds of shafts, spline shafts, pins and other high-frequency quenching.
2.6 Machine tool industry guide, tools swallowtail quenching treatment.
Our factory scene 
.

ISO and CE certification

Packing for induction heating equipment

1.Two wooden cases (plywood) for sea transport. 

Inside,will be filled with plastic foam,for waterproof and shockproof.

2.One for generator ,one for transformer 

3.Accessories: induction coils,foot switch and installing and operating instructions

1. Reply your inquiry within 24 working hours
2. Experienced engineer instruct and sales communicate with you in fluent English.
3. According to work pieces specifications, heating requirements, propose best solutions,also reference your ideas.
4. Machine details and working video link for your reference
5. Competitive price ,compare with the same industry
6. Production: strict quality standard, to produce machine and induction coils.
7. Debugging machine and only good machine will be sent.
8. Tracking goods shipping and provide bill of lading,invoice,packing list and other documents what you need
9. Provide install and technology instruction by sending drawings, email, or telephone,video.
10.If you need, will arrange one engineer to your place,instruct install machine and training operators.
11.Excess warranty period(12 months warranty), you can buy the spare parts from us with special discount price.
12.Provide long-terms technical support.

 If you are interest in induction heating equipment , welcome to contact us.

The following is jessie contact info.

Chian manufacturer of induction heating equipment,since 1996.Welcome to contat us !