Product Details

45kw Annealing furnace for steel bar

Annealing → the workpiece is heated to a suitable temperature,with different incubation times,depending on the material and size of the workpiece , and then slow cooling (the cooling speed is the slowest),so as to make the internal organization of the metal achieve equal or at the equilibrium state, to obtain a good process properties and performance, or prepare for further hardening.

Technical parameters of 45KW annealing furnace for steel bar

Model

Work power

Output power

Oscillation frequency

Output current

Cooling water pressure

Size

Weight

WZP-90

three phase 380V+/-10% 50-60HZ

3-45KW

15-30KHZ

3-90A

0.1MPA

generator 665×400×730mm

transformer 660×490×435mm

62kgs;
47kgs

Annealing furnace for steel bar

Features of annealing furnace

Heating fast: this is the heating rate of less than 1 second (speed adjustable speed control)
Heating wide: wide range of metal parts can be heated (according to the different shape of the workpiece replacement of removable induction loop)
Easy installation: connect the power, induction loop and out of the water can be used; small size, light weight, easy to use
Simple operation: a few minutes to learn
Start fast: you can start with water after the heating power
Low power consumption: high-frequency device than the old-fashioned tube about 70% energy saving, the smaller the power consumption of the smaller parts
Good effect: the heating is very uniform (also by regulating the induction coil density, so that all parts of the workpiece to obtain their desired temperature), heating up fast, less oxide layer after annealing without waste
Adjustable power: The Promise adjust the output power
Protection all: with over voltage, over current, overheating, lack of water and other alarm indicator, and automatic control and protection

Applications of annealing furnace

(1) Stainless steel: stainless steel cups, stainless steel sink, stainless steel boxes, pans, pots, buckets, cutlery, forks, spoons,
(2), other types:
Metal strap flange, exhaust pipe flange, chain annealing, punching, the fans rivet heating, mine screen annealing.
Pumping gas pipe

More different power of annealing furnaces

Model	Input voltage	Input current	Oscillation frequency	Cooling water pressure
WZP-40	320-420V	2-40A	15-30KHZ	0.1MPA
WZP-60	320-420V	3-60A	15-30KHZ	0.2MPA
WZP-90	320-420V	4-90A	15-30KHZ	0.3MPA
WZP-120	320-420V	6-120A	15-30KHZ	0.3MPA
WZP-160	320-420V	6-160A	15-30KHZ	0.3MPA
WZP-200	320-420V	6-200A	15-30KHZ	0.3MPA
WZP-300	320-420V	6-300A	15-30KHZ	0.3MPA
WZP-400	320-420V	6-400A	8-15KHZ	0.3MPA
WZP-500	320-420V	6-500A	8-15KHZ	0.3MPA

Pictures of annealing furnace