Intelligent High FOCUS Speed Dome PTZ CCTV Camera
USD $170 - $225 /Set
Min.Order:1 Set
Shenzhen Rong Tian Shi Tech Ltd.
Model: Intelligent High FOCUS Speed Dome PTZ CCTV Camera
DESPCRITION:
6" size aluminum alloy housing, good for heating dissipation, and is durable, perfect design of high performance digital DSP, stable performance
Built-in English OSD menu
Can set the horizontal auto scan and limitation scan, can adjust the horizontal scan speed
Have 255 preset positions (depend on different camera module), high precision.
8 cruise routes, every route can save 16 preset, working speed and stay time are adjustable.
2 pattern scan, 1 home place.
Can set 2 alarm input and 2 auxiliary alarm output (optional).
Address code range: 1----255, communication mode: RS-485, Baud rate: 2400 / 4800 / 9600 / 19200 bps, set by the dial code switcher, auto identify Pelco D / Pelco P
Idle set: home place / auto scan / cruise scan / pattern scan optional
Can display camera title, can set max 16 letters or numbers for the camera title. Can display the camera position coordinate
Horizontal rotate for 360° continuously
Horizontal rotate speed: 0.1° – 280° / sec
Vertical rotate from 0.1° - 90°, auto flip
Vertical rotate speed: 0.1° – 180° / sec
Position accuracy: 0.05°
Precision electrical motor, works quickly and stable, control sensitively.
Integrated design, compact construction and reliable.
Waterproof level: IP66, can used outdoor
Working temperature: -40°C---65°C
Working humidity: 90%RH
Power supply: DC 12V / 3000mA
Mounting mode: wall mount / hoisting mount method
Packing: in carton (include power adaptor and mounting bracket) 33 x 33 x 42 mm, 6.4 kg.
Camera module information (in the dome housing)
MODEL NO.: | R-800A4 | R-800A6 | |
Image Sensor: | 1/4″ CMOS Sensor | 1/3" SONY 960H EX-view HAD CCD II | |
Effective Pixels: | PAL:752(H)×582(V) NTSC:768(H)×494(V) | PAL:1020(H)×596(V)610K NTSC: 1020(H)×508(V)520K | |
Signal System: | PAL / NTSC | ||
Horizontal Resolution: | 580 TVL | 700 TVL | |
Built-in Lens: | 30X Zoom (F1.6, 3.6~108mm) | 23X Zoom ((F1.4, 4.8~110.4mm) | |
Day / Night switch: | Dual IR-CUT filters auto switch | ||
Focus: | Fast auto focus | ||
Focus Mode: | AUTO (sensitivity: low / mid / high ) / Hand control / Key | ||
Minimum Illumination: | 0.01Lux | 0.001Lux | |
Synchronization mode: | Internal Synchronization | ||
Shutter Speed: | 1/50 (1/60) -- 1/100,000 (second) | ||
Signal to Noise Ratio: | > 50db (AGC OFF) | ||
White Balance: | AUTO / INDOOR / OUTDOOR | ||
AGC: | AUTO / MANUAL (1-4 level) | ||
AEC: | AUTO / MANUAL / BRIGHTNESS ADJUST | ||
BLC: | ON / OFF | ||
Electronic Shutter: | AUTO; 1/50 ~ 1/10,000/S | ||
3D-DNR: | AUTO / OFF / ON (1-8 level) | AUTO | |
Privacy Mask Area: | OFF / ON (6 zones) | / | |
OSD: | ENGLISH / CHINESE OSD | ||
Image Effect: | Horizontal mirroring / vertical flip / frozen | Horizontal mirroring | |
Protocol: | VISCA, baud rate 9600ps ; PELCO-D, baud rate 9600bps | ||
Interface: | 9 Pin Flat Cable | ||
Video Output: | CVBS (1.0Vpp (75 ) & S-VIDEO output | ||
Working Power Voltage: | DC/12V (9V~15V) | ||
Working Temperature: | -25°C TO 60°C |
Common information:
Signal system: | NTSC / PAL |
Mount method: | Wall mount / hoisting mount / in-ceiling mount |
Synchronization mode: | Internal Synchronization |
Application: | Indoor / outdoor |
Shutter Speed: | 1/50 (1/60) -------- 1/100,000 (second) |
Signal to Noise Ratio: | 48dB (AGC OFF) |
Control Interface: | By wire, RS 485 |
Range of Video Output: | 1.0Vp-p,75Ω (BNC) |
Working Power: | DC 12V / 3A |
Power Consumption: | 3.6 W |
Packing weight: | 5.9 KGS ( include power adaptor, bracket and all parts ) |
Packing size: | In carton, 38cm (L) x 38cm (W) x 43cm (H) |
1.OEM&ODM Service:Accepted
2.Warranty time: 2 Years
3.After-sale Service:Most through Internet,On-site service if needed.
Company:
1.Are you a factory or trading company?
We are a CCTV Camera factory over 10 years with ISO9001 System audit.
2.Where is your factory ?
Our factory is located in Shenzhen, China, very near to HK.
3.Is the Sample Free?
Sample requirement is accepted,but not free.
4. :How does your factory do on quality control ?
You order will be test 100% before packing and shipping & third party inspetion is welcome
5. What your delivery date?
A:7-20 days usually
6. Can you printing our logo on cable or packing?Do you accept OEM & ODM?
Yes,available.