End brush, crimped wire 

Technics Description:   

Fill type   

"soft"                          

B     brass wire(cuzn), straight criped, dia.0.06mm to 0.50mm                          

AS   abrasive nylon sic or ao,k80-k320 crimped                           

"medium"                           

S     steel wire, natural hard, crimped, dia.0.60mm to 0.80mm                          

SS   stainless steel wire, acid resistant, crimped or straight, dia.0.30mm to 1.00mm                          

"hard"                         

ST   steel wire, tempered, straight, dia.0.30mm to 1.20mm                         

BS   brass-coated steel wire, single wire, springy, crimped, dia.0.15mm                      

GS   galvanized steel wire, natural hard, crimped, dia.0.06mm to 0.80mm                         

Safety requirements:   

1. HANDLING:   

   While inspection, storage, fitting the brushes, be care to avoid the injury by the wires.      

2. OPERATING:       

   In brushing operation, the potential of serious injury exists for both the operator and others in work fielde. So safety goggles, or full face shields and protective clothing must be used by all of the persons in work fields.        

3. EQUIPMENT CONDITION:        

   Proper maintenance of machines and power tools is essential to keep them in safety operating condition.        

4. RUNNING SPEED:          

   Observe all speed restrictions indicated on the brushes or the packings.     

5. BRUSHING PRESSURE:  

   Excessive pressure may causes overbending of the filaments as to breakage.

If you want to know more about this products, please let me know more informtion.