micron powder laboratory pulverizer machine /grinding mill with air classifier/fine powder machine/jet milling
USD $25,000 - $70,000 /Set
Min.Order:1 Set
Mianyang Liuneng Powder Equipment Co., Ltd.
Best-selling Lab Use Jet Mill
General
Lab Use Jet Mill is special designed for universities and research institutions, small dimension, compact structure, easy to disassemble and clean.
Superfine grinding and precision classifying
Material collision each other lead to breaking without contamination
Effective for heat-sensitive material
Easy to disassemble and clean
Automatic control system
Effective for Mohs 1-10 hard material
Personalized design to solve the affairs on grinding and classification
The specific requirement of protection system for Inert Gas
Features
Best-selling Lab Use Jet Mill has small size so that it can be placed on desk or laboratory bench. It has compact structure and disassembling is easy, with features as follows:
1 Particle acceleration, improved grinding efficiency and energy saving without over-ground fineness;
2 Effective for grinding hard materials (Mohs 1-10) with little tool wear and no contamination;
3 Effective for heat-sensitive and low melting point materials;
4 Effective for dispersing agglomerate ultrafine powder;
5 No oversized particles;
6 Good dynamic balance and long service life;
7Adjustable particle size distribution with little material loss;
8 High collecting efficiency (up to 99.9%) and easy to clean;
9 Easy to operate due to PLC (Programmable Logic Controller) control system.
Applications
Colleges, scientific research institutions, corporate Research and Development, small serial production.(suitable for chemical industry, medicine and pharmacology,mineral materials,new materials,etc.)
Technical Data
Model | Air Flow | Max Feed Size (mm) | Product Size (d50μm) | Capacity (kg/h) | Power (kw) |
LNJ-6 A | 1m³/min | ≤1mm | 2-60µm | 0.2-3kg/h | 9.5kw |
LNJ-6A-2 | 1m³/min | ≤1mm | 2-60µm | 0.2-3kg/h | 11kw |
LNJ-12A | 2m³/min | ≤3mm | 2-100µm | 5-10kg/h | 18.7kw |
LNJ-12A-2 | 2m³/min | ≤3mm | 2-100µm | 5-10kg/h | 20.2kw |
LNC-80A |
| 0-100um | 0-60µm | 0.5-5kg/h | 2.5kw |
LNC-80A-2 |
| 0-100um | 0-60um | 0.5-5kg/h | 3.5kw |
LNC-120A |
| 0-150um | 0-100um | 5-20kg/h | 4kw |
LNC-120A-2 |
| 0-150um | 0-100um | 5-20kg/h | 5.5kw |
Office and Plants
patents
Communications with customers