PET BOTTLE PREFORM INJECTION MOLDING MACHINE HDX208PET FOR SMALL VOLUME
Negotiable /Set
Min.Order:1 Set
Ningbo Haida Plastic Machinery Co., Ltd.
PET Bottle Preform Injection Machine and Accessories
Dehumidifying dryer and auto loader system for material.
Environment dehumidifying dryer system.
Chiller system.
Mold and hot runner temperature controller system.
Automatic system.
PET Bottle Preform Injection Machine Features
Special injection construction designed to benefit for plasticizing.
By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
By use of PID temperature controller, which has limitations for screw cold starts,broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C.
Microprocessor controller with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
Shut-down memory is able to store up to 100 preset mold data memory.
Higher stability and lower defect in PET preform dimension.
HDX208 Pet Bottle Preform Injection MachineParameter,
ITEM | UNIT | DATA | ||
Injection | Screw Diameter | mm | 50 | 55 |
Screw L/D Ratio | L/D | 24 | 24 | |
Injection Volume | cm3 | 461 | 558 | |
Shot Weight(PVC) | g | 553 | 669 | |
Injection Pressure | Mpa | 170 | 141 | |
Clamping | Clamping Force | KN | 2080 | |
Opening Stroke | mm | 475 | ||
Mould Thickness(Min-Max) | mm | 200-520 | ||
Space Between Tie-Bars | mm | 515×515 | ||
Ejector Force | KN | 62 | ||
Ejector Stroke | mm | 165 | ||
General | Motor Power | KW | 22 | |
Heater | KW | 18.5 | ||
Pump Pressure | Mpa | 16 | ||
Machine Dimension | m | 5.9×1.4×2.3 | ||
Machine Weight | T | 6.75 | ||
Mould Orientation Ring Diameter | mm | Φ160 | ||
Nozzle Radius | mm | SR15 |