HDJS servo motor energy saving machine, buy Latest Design small injection molding machine on China Suppliers Mobile

Product Details

Product Description

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	35	38	40
	Screw L/D Ratio	L/D	20.5	19	18
	Injection Volume	cm³	144	170	188
	Shot Weight	g	131	155	171
	Injection Pressure	Mpa	194	165	149
Clamping Unit	Clamping Force	KN	880
	Opening Stroke	mm	320
	Mould Thickness(Min-Max)	mm	150-360
	Space Between Tie-Bars	mm	365×365
	Ejector Force	KN	38
	Ejector Stroke	mm	100
General	Motor Power	KW	11
	Heater	KW	6.5
	Pump Pressure	Mpa	16
	Machine Dimension	m	4.1×1.2×1.9
	Machine Weight	T	2.8
	Mould Orientation Ring Diameter	mm	Φ125
	Nozzle Radius	mm	SR10

HDJS Servo Energy-Saving Machine

Superior Energy Efficiency

To Save Power Consumption

Cooling phase, the motor does not need to work, power consumption is 0.

Compared with the traditional injection molding machine can save electricity <80%

Saving Water And Fuel

Compared with the traditional hydraulic power system of the hydraulic oil

consumption reduce

1/4 ~ 1/3, can achieve without cooling, thus greatly saving water.

Living longer 2~3 Double.

Power Consumption Curve Comparison Chart

Improve The Production Efficiency

Quick Response And High Efficiency

Injection molding machine to achieve maximum output in 0.05 s

50 rpm can be up to 140 bar

High Repeat Precision, Save Raw Materials

Repeated injection precision can reach <=3%

Pressure Is Stable, Improve the Quality Of Molding

Pressure fluctuation quantity is less than + / - 0.5 bar

Stable At Low Speed

Closedloop control pressure and flow, at low pressure and low flow operation performance is particularly

outstanding, shoot rubber speed in less than 1 mm/SEC without crawling, pulse, high stability. System according to the actual product process requirements, set arbitrary pressure and flow, avoid excess heat generation, the oil temperature relative to the traditional injection molding machine is stable. In addition, the pressure

flow automatic compensation when motion, maintain the stability of the pressure and flow rate, high control accuracy and repeat precision.

Machine Service Life Longer And Cleaner Working Environment

Less Noise Emissions

Low Heat And Cooling Energy Demand Is Low,

More Suitable For Production Environment With Air Conditioning

Injection molding machine boot into the steady-state oil temperature rise of 8°C to 10°C

Machine in Details

Meticulous division of labour, consecutive processes, professional experience of manufacture and high standard equipment ensure the high quality of the machine. We put stress on every working procedure to meet the requirements of customers for high quality. Recently, we have introduced high precision machining tools,with the equipment of cutting machine tools, heat-treating facilities, check out test sets and painting facilities, the processing ability of Haida Company, especially for the large and supersized machine reach a high level in plastic machine industry while the quality of the machine is ensured at the same time.

Good products must be based on good equipment and technique. Haida company take advantage of new equipment and technique in the world to develop the design of machines. We don't hesitate to input more about these. Equipped-well design center, Vanward institute in plastic machine industry, R&D Center, CAD design Center and test Center ensure the vanward design of Haida company.

Packaging & Shipping

Our Services

There are more than 10 Agents of our Haida located in the world.

Engineers available to service machinery overseas

Company Information

NINGBO HAIDA Plastic Machinery Co., Ltd. is a large professional production base specialized in manufacturing HDX HDJS HDJL series automatic plastic injection machines and enjoy high reputation in the plastic machinery industry association, vice President of units. In recent years, our company undertake entity of project under the new high-tech enterprise, state inspectionfree product, China famous brand, Zhejiang province

famous brand and Zhejiang province well known product. In 2000, we had the right of selfimport and export

and had registed our brand in more than ten countries and areas. Our company was accredited by BCC (ISO9001) and CE certificate in 2001 and ISO14001 and OHSAS18001 in 2007.

Established in 1992, Ningbo Haida Plastic Machinery Co., Ltd. become one of the most famous companies in the plastic machinery industry. It covers an area of more than 100 thousand square meters and has a total asset of RMB 350 million. There are 420 workers and staff members including 30% professionals with middle or senior class techinical certificate. Famous senior engineers and experts are invited regularly as our advisers. Our HDJL and HDJS series variable pump and servo motor machines are well-known by our clients.

FAQ

2005 year State Inspection-Free Product
2005 year Zhejiang Province Well-Known Product
2005 year Zhejiang Province Well-Known Trade Name
2005 year National Torch Program. High-tech Enterprise
2001year CE Certification issued by Germany TüV Company
2001 year BCC(ISO9001) (2000 Version)