Name: bathroom wall tiles xps foam board fiber cement tile backer board
Brand: Olingen
Availability: InStock

Product Details

Specification:

1. Waterproof and insulating XPS

2. Thickness:4mm~100mm
3. Light weight, easy to cut and assemble

4. ISO certificated

Product Description

bathroom wall tiles xps foam board fiber cement tile backer board

Product name

OLINGEN board (also known as construction board, tile backer board, insulation backer board ,

waterproof backer board ,wet room backer board)

Product structure

OLINGEN boards are made of high-performance waterproof extruded polystyrene,it has a 0.75mm

coating on either side comprising a glass fiber mesh embedded in a polymer cement mortar. It is

ideal for wet-zone and damp zone in a bathroom, washroom and shower area.

Outstanding characteristics

Light weight, insulation and waterproof,etc.

Product appearance

The boards have straight edges. The color of the surface is grey and the core material is light blue

Working temperature range

-50 to +75 °C

Reaction to fire

The boards are classified as class E according to EN 13501-1. When the boards are covered with

tiles, their fire performance should comply with local construction laws and regulations.

Effect on indoor environment

OLINGEN board has been assessed as not emitting any particles, gases or radiation that may have

a negative effect on the indoor climate or to have any significant effect on health.

Environmental declaration

The product does not contain any substances on the observation list of dangerous substances

published by the national environmental authorities.

Fixing

Choose a way to fix OLINGEN boards according to the substrate to be fixed to. Normally, using modified

tile adhesive for solid concrete wall/floor and strengthened by mechanical fixings when necessary while only

using mechanical fixings for wood and steel frames.

Reinforcement

1. Dry areas: reinforce all joints between boards, floors and walls by 5cm or 10cm wide self-adhesive tape.

2. Wet areas: reinforce by suitable waterproof tape.

Waterproof strengthen

1. Strengthening all joints between boards, floors, walls and mechanical fixings placements by

suitable waterproof tape.

2. Strengthening joints between walls, outside corners and inside corners by special corners.

3. Sealing pipe holes with special waterproof tape.

4. Strengthening once again by waterproof glue, liquid tanking membrane, tanking membrane

paint, etc. when necessary.

Coating of panels

Should always be covered by ceramic tiles, mosaics or other equivalent non-fireproof materials after installation.

Advantages of XPS Backer Board

Olingen board is an innovative underlayment for ceramic and natural stone tiles -- suitable for all construction areas and for installation over metal and wooden stud frames, green masonry, and renovation surface.

For this purpose, Olingen board offers the following properties:

Impact resistant and rigid
Waterproof and temperature resistant
Vapour retardant
Thermally insulating
Quick and easy to handle and transport
Easy to cut (with a utility knife)
Suitable for use on any kind of backgroud substrate
Suitable for freestanding partition walls, shelves, coverings and similar surfaces

A tile backing you can rely on

Tiling practice today is demanding. Designers want scope, contractors need speed and satisfied clients are paramount. OLINGEN thermal construction board delivers even/time.

OLINGEN thermal construction is so much more than just an item of building material. It combines a number of impressive properties in one product.

Manufactured to the highest specification, OLINGEN tile backer board is the benchmark for dimensionally stable, impervious and durable tiling boards. Shower or steam room, house or hotel, OLINGEN tile backer board is the safe choice. Common installation failures due to water ingress or unsuitable materials such as plywood or plasterboard are banished to the past.

It is available in different thicknesses and has become a genuine all-rounder because it is so flexible and easy to process.

The strength of OLINGEN thermal construction is the composite construction. The hard extruded foam core is reinforced both sides with a fiber glass mesh and special mortar. Strong and lightweight, OLINGEN thermal construction is recommended for use over any substrate or construction. No longer is it necessary to render and plaster new walls or remove old tiles or plaster. Use OLINGEN thermal construction and tiling can start straight away.

Create partitions, insulate a floor for electrical under floor heating, or make a bath panel. OLINGEN board is the versatile board for all tiling. Whether it is being used as a carrier material on a wall, to clad old substructures and pipes, as a substructure system on the floor, or used to create bathroom furniture, for example, each shape, however sophisticated it is, can be produced individually with OLINGEN thermal construction boards.

Technical Data

Property	Rating
Density	36kg/m³
Thermal conductivity	^{≤0.035W/(m*k)}
Compressive strenth (10% deflection)	minimum of 0.25 N /MM²
Flexural strenth	2.05N
Water absorption (2-day immersion)	≤1%
Water absorption (capillary)	⁰
Coefficient of linear expansion	30* 10^-6
Water vapour diffusion resistivity (μ )	110-225 μ
Water vapour permeability	0.028 ng/pa.m.s
EU controlled substances content	None

Applications

1. as a watertight layer on walls and floors in wet rooms and bathrooms.

2. as an insulation layer in under floor heating to avoid heat loss.

3. as partition walls in wood or steel frames.

4. substitute for gypsum board and fiber cement board; insulation and waterproofing; lighter so

that more easily to install.

5. As enclosures for bathtubs, water pipes, etc.

6,Can very easily and fast formed to be small shelves, washbasins, shower benches and soap

boxes.

7. Combining with OLINGEN curved/shapeable boards, kinds of decorative models can be made with your infinite creativity.

Only imagination can limit the use of OLINGEN thermal construction board.

Type & Size accordingly

Thickness(mm)	width(mm)	length(mm)	Weight (kg/m²)	packaging
6	600	1250	2.7	20pcs/carton
10	600/900	1250/2500	2.9	20pcs/carton
12	600/900	1250/2500	3.0	20pcs/carton
20	600/900	1250/2500	3.2	10pcs/carton
30	600	1250/2500	3.4	10pcs/carton
50	600	1250/2500	4.3	6pcs/carton

The board has the following tolerances:thickness:± 2mm width:± 2mm length:± 3mm

Installation Examples