XPS tile backer board, buy XPS Angled Pipe Boxing on China Suppliers Mobile

Product Details

Specification:

1. Waterproof and insulating XPS

2. Thickness:4mm~100mm
3. Light weight, easy to cut and assemble

4. ISO certificated

Product Description

XPS L/U-shaped Angle Board

Pipe boxing-pre-fabricated building board elements

In addition to L and U-shaped components, the pre-fabricated elements made from OLINGEN construction boards are particularly used for cladding bathtubs and shower trays.

Afxing bath shelves and cladding.

Boxing in pipes using conventional materials takes time, creates mess and rarely creates an ideal substructure for tiling.

In addition, the practical U-shaped elements allow you to create your own shelf and support solutions, integrating them fully into the design of the bathroom.

Product name

OLINGEN board (also known as construction board, tile backer board, insulation backer board ,

waterproof backer board ,wet room backer board)

Product structure

OLINGEN boards are made of high-performance waterproof extruded polystyrene,it has a 0.75mm

coating on either side comprising a glass fiber mesh embedded in a polymer cement mortar. It is

ideal for wet-zone and damp zone in a bathroom, washroom and shower area.

Outstanding characteristics

Light weight, insulation and waterproof,etc.

Product appearance

The boards have straight edges. The color of the surface is grey and the core material is light blue

Working temperature range

-50 to +75 °C

Reaction to fire

The boards are classified as class E according to EN 13501-1. When the boards are covered with

tiles, their fire performance should comply with local construction laws and regulations.

Effect on indoor environment

OLINGEN board has been assessed as not emitting any particles, gases or radiation that may have

a negative effect on the indoor climate or to have any significant effect on health.

Environmental declaration

The product does not contain any substances on the observation list of dangerous substances

published by the national environmental authorities.

Fixing

Choose a way to fix OLINGEN boards according to the substrate to be fixed to. Normally, using modified

tile adhesive for solid concrete wall/floor and strengthened by mechanical fixings when necessary while only

using mechanical fixings for wood and steel frames.

Reinforcement

1. Dry areas: reinforce all joints between boards, floors and walls by 5cm or 10cm wide self-adhesive tape.

2. Wet areas: reinforce by suitable waterproof tape.

Waterproof strengthen

1. Strengthening all joints between boards, floors, walls and mechanical fixings placements by

suitable waterproof tape.

2. Strengthening joints between walls, outside corners and inside corners by special corners.

3. Sealing pipe holes with special waterproof tape.

4. Strengthening once again by waterproof glue, liquid tanking membrane, tanking membrane

paint, etc. when necessary.

Coating of panels

Should always be covered by ceramic tiles, mosaics or other equivalent non-fireproof materials after installation.

Advantages of XPS Backer Board

Olingen board is an innovative underlayment for ceramic and natural stone tiles -- suitable for all construction areas and for installation over metal and wooden stud frames, green masonry, and renovation surface.

For this purpose, Olingen board offers the following properties:

Impact resistant and rigid
Waterproof and temperature resistant
Vapour retardant
Thermally insulating
Quick and easy to handle and transport
Easy to cut (with a utility knife)
Suitable for use on any kind of backgroud substrate
Suitable for freestanding partition walls, shelves, coverings and similar surfaces

A tile backing you can rely on

Tiling practice today is demanding. Designers want scope, contractors need speed and satisfied clients are paramount. OLINGEN thermal construction board delivers even/time.

OLINGEN thermal construction is so much more than just an item of building material. It combines a number of impressive properties in one product.

Manufactured to the highest specification, OLINGEN tile backer board is the benchmark for dimensionally stable, impervious and durable tiling boards. Shower or steam room, house or hotel, OLINGEN tile backer board is the safe choice. Common installation failures due to water ingress or unsuitable materials such as plywood or plasterboard are banished to the past.

It is available in different thicknesses and has become a genuine all-rounder because it is so flexible and easy to process.

The strength of OLINGEN thermal construction is the composite construction. The hard extruded foam core is reinforced both sides with a fiber glass mesh and special mortar. Strong and lightweight, OLINGEN thermal construction is recommended for use over any substrate or construction. No longer is it necessary to render and plaster new walls or remove old tiles or plaster. Use OLINGEN thermal construction and tiling can start straight away.

Create partitions, insulate a floor for electrical under floor heating, or make a bath panel. OLINGEN board is the versatile board for all tiling. Whether it is being used as a carrier material on a wall, to clad old substructures and pipes, as a substructure system on the floor, or used to create bathroom furniture, for example, each shape, however sophisticated it is, can be produced individually with OLINGEN thermal construction boards.

Technical Data

Property	Rating
Density	36kg/m³
Thermal conductivity	^{≤0.035W/(m*k)}
Compressive strenth (10% deflection)	minimum of 0.25 N /MM²
Flexural strenth	2.05N
Water absorption (2-day immersion)	≤1%
Water absorption (capillary)	⁰
Coefficient of linear expansion	30* 10^-6
Water vapour diffusion resistivity (μ )	110-225 μ
Water vapour permeability	0.028 ng/pa.m.s
EU controlled substances content	None

Type & Size accordingly

Product name	Size(mm)w*L	L-style width(mm)	Sheets/carton
L-shaped	20*1220/2440/1250/2500	300*300	10
L-shaped	20*1220/2440/1250/2500	200*400	10
L-shaped	20*1220/2440/1250/2500	150*150	10
U-shaped	20*1220/2440/1250/2500	200200200	10
U-shaped	20*1220/2440/1250/2500	100400100	10
U-shaped	20*1220/2440/1250/2500	150300150	10

The board has the following tolerances:thickness:± 2mm width:± 2mm length:± 3mm

Related Products

Installation Examples

Under floor heating

Pipe insulation

Our Services

Quality & Service In our company, our #1 priority has always been providing our clients with great quality products and superior customer service. we are Professional Leading Manufacturer

Quick Lead Time We have cooperated with world-chain store and we dedicated to providing the quickest turnaround times and work very Hard to ensure that all of your deadlines are met.

Brand Awareness The goal of any strong brand is achieve a level of awareness that instills the idea of quality and value into all of your potential customers.

Special Offers In order to maintain our competitive edge; we are constantly running special offers on our products, consumer goods, and design services. Contact our sales team to see how we can help you save a lot of money.

Company Information

Zhejiang Olingen Building Materials System Co., Ltd is specialized in the producing, designing, selling and installing of building materials. Over the past decades, our company has been constantly expanding its size and developing its production system by resorting to its strong technical research and development capabilities. Its main products include culture stone, gravel, brick, EPS component, soft tile, polystyrene cement products and other building materials alike.

We always adhere to the business philosophy of “best product quality, timely technical service” and the management mode of “normalization, standardization, systematization”. Our sincerity, humility and provenance enable us to work with high sense of responsibility, vocation and urgency. By strictly adhering to ISO 9001 production management system as required, we provide our customers with high-quality products and satisfactory services.

Feel free to contact us if any item is interested to you.

FAQ

Q1. Why choose Olingen ?

Olingen Buliding Materials is professional and in this field 20 years. We consistently use genuine raw materials including Portland cement, Bayer pigments, BASF adhesive and other aggregate materials for production assuring the quality and reliability of our products. Our products have passed CE and Eurofins Test, the materials are eco-friendly and no harmful for human body, the products can be safely to be used in interior and exterior wall decoration

Q2. Can you provide samples before confirm the order?

A: Yes, we are happy to send you samples for testing purpose, but we need charge delivery cost

Q3. What is your MOQ ?

The MOQ of 200sq.m for per item, but less than 200 is also available.

Q4. What is your estimated time of delivery?

About 25 days. Because the main raw material is cement, it needs around 20days to maintain the products to guarantee the strength.

Q5. What is your payment terms?

T/T,Western Union, Paypal,etc.

Q6. How can I install the backer board?