XPS shower tray, buy Shower room waterproof shower tray on China Suppliers Mobile

Product Details

Shower room waterproof shower tray

Product Overviews

Olingen shower tray, also known as waterproof shower base, shower pan, shower lay, waterproof wetroom floor insulation board.

Olingen XPS shower base is a low-cost, easy-to-install waterproof base, used in the design of a wet room for the home and suitable to be fixed to both timber and concrete floor. The tray is easily cut into any size or shape and forms a floor level, barrier- free panel ready to receive tiles with a preformed slope to the drain.

Product structure:

Made of high-performance waterproof extruded polystyrene, it has a 0.75mm coating on either side comprising a glassfiber mesh embedded in a polymer cement mortar.

SIze available :

Shower base
800*800	central drain	1000*1000	offset drain
900*900	central drain	1000*1200	offset drain
1000*1000	central drain	800*1800	offset drain
1200*1200	central drain	1200*900	offset drain
1500*1500	central drain	800*1500	offset drain
1200*900	central drain	800*1200	offset drain
1200*800	central drain	1200*1200	offset drain

We accept customized shape, size, drain position .

Product Display

Product Advantage

Project Cases

FAQ

Why do I need Olingen BOARD?

Because Olingen BOARD will save you money by acting as a very efficient insulation barrier. It reflects the heat upwards into the floor tile instead of allowing the heat to warm up the concrete slab below. Besedes, it not only has the function of heat insulation and strong waterproofness, but also provides a base for the ceramic tile.

How does compare to plasterboard?

It doesn’t there really is no comparison. Standard plasterboard offers approximately 1/6th the U value of an equal thickness of Olingen BOARD. and yet is approximately 7 times heavier. When used in wet areas, such as bathrooms or showers,Olingen BOARD is totally waterproof whereas plasterboard will absorb water unless it is of the waterproof variety which will cost considerably more.

Compare a few characteristics of Olingen BOARD against plasterboard

1. 1/7th the weight of Plasterboard

2.waterproof, ordinary plasterboard is not.

3.(10mm) has a U value of 2.7 against 12.8 W/M2 K of 12.5mm

What thickness Olingen BOARD do I need?

The thicker the Olingen BOARD the better the heat insulation, but obviously if you have an existing floor that you want to insulate, you may well be governed by the thickness you can add to the floor because of the height from the finished floor to the underside of your door. Even by using 6mm Olingen BOARD you will notice the benefit of insulating with Olingen BOARD .Generally speaking,,6mm and 12mm are used for floor while thicker than 20mm are usually for wall partition.

How do I fix Olingen BOARD to walls?

The board can be either fixed to timber battens with screws and screw cups or fixed directly to brick or block walls by drilling, plugging and screwing the boards to the wall. If the wall is to be plaster finished, the joints should be reinforced with a plaster scrim

How to store Olingen BOARD ?

To ensure the boards flat ,the boards should keep level. Boards can't exposed to fire or other organic solvent so that board can be provented from ultraviolet radiation during long-term storage. Slight bowing caused by incorrect storage or transport, for example, is not permanent and does not represent a technical defect. Slight curving can be rectified through storing the boards flat.