Calcium Silicate Board
USD $210 - $250 /Cubic Meter
Min.Order:27 Cubic Meters
Laizhou Yongda High Temp. Material Co., Ltd.
Laizhou Yongda High Temp Insulation Material Co.,Ltd. produce and export calcium silicate insulation slabs includes High Temperature Calcium Silicate Insulation Slabs,Super Calcium Silicate Fire Proof Board, High Temperature Calcium Silicate Cord for Fireproof and Sand Insulation Door,High Pure Type Calcium Silicate Boards,High Strength Calcium Silicate Boards.Our products application in industries of metallurgy,building material,petrochemistry,nonferrous metal,machinery,electric power,light induatry, cement kiln furnace,cave dwelling of steel mill,petrochemical,ceramic,glass industries.Our calcium silicate boards has been exported to Korea,German, Spainm,India, Turkey and Russia.
ENSIONAL TOLERANCES
| YONGDA BRAND |
GB/T10699-1998 TYPE-II
| ASTM C533-2007 TYPE-II |
LENGTH | ±2mm | ±4mm | ±3mm |
WIDTH | ±2mm | ±4mm | ±3mm |
THICKNESS | ±2mm | +3mm -1.5mm | ±3mm |
1. ACCESSORIES AND INSTALLATION
A. Auxiliary Products
YD—1 High Temp. Adhesive:Blended with water glass to form a mortar for the tight connection between insulationg board with board,also can be used for insulating board and other underdrop with consumption about 3.0kgs/m2.
YD—2 Waterproof Agent: When our insulating board is used with casting material and other monolithic refractories,waterproof agent is painted on the interface with consumption 3.0kgs/m2.
B. Installation tool:Basin and trowel
C. Clean the contact face firstly.
D. YD-1 one portion ,water glass(also named sodium silicate)of about 1-1.5 portion,according to the circumstances surrounding the construction site to determine, thick moderately lean, these two materials fully mixed evenly, you can use.
E. Bonding between the calcium silicate board thickness 1.5-2mm, can be forced extrusion
F. Because our board has very good processability, the general architecture fixer can be used if need.
G.Moisture absorption of calcium silicate board, if do not use water –proof agent, waxed paper and PE film should be considered to be used to separate with casting material .
H.Binder is used the existing service, not to store too much time to avoid hardening crust,will can not be used.