Specifications

Crop straw briquette making machine
1.Flat-dies
2.Easy operate
3.Roller & mould are made from special alloy

Introduction:  

Yugong Brand Machinery has introduced into advanced technology,invented SJM-6 Smooth Rotation Crop Straw Briquette Making Machine .

 

 

 

      

This kind of machine can produce a special coal (High efficiency fuel) with many kinds of agriculture waste as raw material, such as corn straw, rice hull, peanut hull, sawdust and so on ,also the material own low adhesion rate and it's difficult to forming. The heat quantity caused by burning this fuel is equivalent to coal, and moreover, the quantity of carbon dioxide in smoke dust, especially the quantity of sulfur dioxide, reduces extremely. Also the cost is much lower than coal.The finished product mainly used as fuel in furnace,boiler and power plant, the clinker after burning was directly used as fertilizer. It is especially confirmed to the world market of renewable compression biomass energy demand.

   

 

Specifications:
  Biomass briquette machinery used to make briquettes in charcoal, medicine, food, industry processing area. It is automatic Charcoal briquette machine from agricultural waste.
  Biomass briquette machinery grinders and briquetting presses are capable of densifying wood waste and many other agricultural feed stocks containing less than 12% moisture. These feed stocks can easily be ground and pressed into a high value solid fuel briquette that can then be used for heating and energy applications.
  Biomass briquette machinery investment is a best project to generate revenue from agro-forestry waste and to produce Green Energy to protect the global environment. The awareness of using Eco-friendly & Non-conventional Bio-coal / Bio-fuel is increasing day-to-day due to the increasing of the conventional fuel cost.

 

 

SJM-6 Smooth Rotation Crop Straw Briquette Making Machine

 

 

Compared to ring-dies briquetting machine---The ring dies briquetting machine is restricted by ring diameter,its roller can not be enlarged enough, roller bearing room is smaller, so the assembly bearing is not strong enough to withstand pressure,so the problems come to being:bearing's less standing ability leads to frequent repair.

Characteristic:  

1.The mould & rollers are made from special alloy and processed by special method & treatment,

   so with extreme durability.Successfully overcomed the poor resistance of traditional mould &

   roller.

 

2.It adopts screw-center adjusting pressure structure,the pressed rollers' gap can be  adjusted

   smaller or bigger,so it can meet different materials' demand and make sure the briquetting effect.

 

3.Main machine equippmed with specially desinged screw conveyor which has speed control device,

   thus can realize feeding steadily and cleanly for all kinds of raw material.

 

4.Main machine,screw conveyor and speed control device can be operated through one combined

   control panel.Which is more convenient and labor-saving.

  

5.With 1 year warranty.