Suitable for screen printing, drying cloth, trademarks banded with items,stamping one-stop complete computer program to control the degree of automation.

Technical parameters:

 Equipment characteristics:
1.PLC and touch screen control, servo motor drive
2.Linear bearing, ball screw precision sliding unit

Product description:
The equipment adopts the servo motor drive, linear guide, ball screw and other precision sliding unit, touch screen man-machine interface, stable operation is used to transfer various plane, the goods such as slope, table Angle can be adjusted , the biggest transfer slope is 30 ° .

With a photoelectric detector positioning system, accurate bronzing transfer.

Mainly used in:

Conical, cylindrical, and with a drumhead irregular objects bronzing and thermal transfer.

Advantages:

1. Computer controlled automation.

2. Servo motor drive, positioning is accurate.

3. Silk screen automatically to one or more simultaneous screen printing and hot stamping.

4. Stamping bottom touch roller vertical and horizontal adjustment.

5.Screen printing, drying, stamping one-stop automation.

The stamping process the matters needing attention:

(1). According to the different varieties of scalded object, select the appropriate hot stamping foil.Good sized must master the temperature, pressure, stamping speed three party coordination, and according to the short-run printing materials, area of difference.

(2). The cutting knife should grasp the direction and speed of car;

(3). The anodized hot stamping foil should choose attributes suitable paper, ink (especially black ink), kerosene, composite glue, hot stamping parts must be kept dry, so as to avoid the bronzing layer oxidizing or injury;

(4). The general packaging: 0, 64 × 120m volumes, each volume 10: a box can be custom width of 0.64M, length of 240m or 360m rolls or other special specifications;

(5). When stored to prevent pressure, moisture, heat, sunscreen, placed in a cool ventilated place.

 Hot stamping temperature reference

The stamping process the matters needing attention:

(1). According to the different varieties of scalded object, select the appropriate hot stamping foil.Good sized must master the temperature, pressure, stamping speed three party coordination, and according to the short-run printing materials, area of difference.

(2). The cutting knife should grasp the direction and speed of car;

(3). The anodized hot stamping foil should choose attributes suitable paper, ink (especially black ink), kerosene, composite glue, hot stamping parts must be kept dry, so as to avoid the bronzing layer oxidizing or injury;

(4). The general packaging: 0, 64 × 120m volumes, each volume 10: a box can be custom width of 0.64M, length of 240m or 360m rolls or other special specifications;

(5). When stored to prevent pressure, moisture, heat, sunscreen, placed in a cool ventilated place.

                                             IN THE HOT SALE