cord reinforcement sandblast rubber hose
Negotiable /Meter
Min.Order:500 Meters
Penglai Aofenglian Rubber & Plastic Products Co., Ltd.
1.Cord sand blast rubber hose
Use:
used in wind -pressured sand -spraying machine to get rid of the rust by spraying sand or iron ball.
Characteristics:
The inside is wear-resisting and the outsid layer is good at anti-aging and wear-resistance.the burst pressure of the hose is four times higher than the working pressure.
2.Wire braid sand blast rubber hose
Use:
used in wind -pressured sand -spraying machine to get rid of the rust by spraying sand or iron ball.
Characteristics:
The inside is wear-resisting and the outsid layer is good at anti-aging and wear-resistance.the burst pressure of the hose is four times higher than the working pressure.
Inside Diameter | Layer | Working pressure Mpa(kg/cm2) | Normal | Max | ||
Size | tolerance | M | tolerance | |||
13 | ±0.2 | 2 | 1.6(16) | 20 | ±0.1% | 40 |
16 | ±0.2 | 2 | 1.6(16) | 20 | ±0.1% | 40 |
19 | ±0.2 | 2 | 1.6(16) | 20 | ±0.1% | 40 |
22 | ±0.2 | 2 | 1.6(16) | 20 | ±0.1% | 40 |
25 | ±0.2 | 2 | 1.6(16) | 20 | ±0.1% | 40 |
32 | ±0.4 | 2 | 1.6(16) | 20 | ±0.1% | 40 |
38 | ±0.4 | 2 | 1.6(16) | 20 | ±0.1% | 40 |
45 | ±0.4 | 2 | 1.6(16) | 20 | ±0.1% | 40 |
51 | ±0.4 | 4 | 1.6(16) | 20 | ±0.1% | 40 |
64 | ±0.4 | 4 | 1.6(16) | 20 | ±0.1% | 40 |
76 | ±0.4 | 4 | 1.6(16) | 20 | ±0.1% | 40 |
89 | ±0.4 | 4 | 1.6(16) | 20 | ±0.1% | 40 |
102 | ±0.4 | 4 | 1.6(16) | 20 | ±0.1% | 40 |