Industrial RO membrane LP3020

Specification 

Use: Industrial water treatment
Membrane sheet: Toray Japan
Rejection RATE: 99.5%
Recovery rate: 15%
Capacity: 600GPD
Active Area: 26 Ft² (2.4M²)
Test Pressure: 150 Psi (1.05mpa)
Packaging Details: 1PCS/CTN

Test conditions

1. The test is under water temperature 25°C, nacl 500mg /l, pH 7.5 and the standard recycle rate and so pressure.

2. The water output deviation of single membrane is between 15percent .of mean values.

3. The lowest desalination rate is 95.0%

Limited conditions

Max operation pressure ……………………………..600psi (4.2mpa)

Max feed water temperature …………………………45°C

Max feed water sdi …………………………………5

Max free chlorine in feed in water …………………less than 0.1mg /L

Range of feed water PH value of constant run …………..3to10

Range of feed water pH value of chemical cleaning …….2to 11

Max pressure drop of single out membrane ……………..15(0.1mpa)