SNMA Indexable tungsten carbide Inserts:

 
Having superior wear resistance and toughness at the same time due to special crystalline structure

indexable inserts

TNMG-B25

110308

160304

160312

160316

160404

160408

160412

160416

Selected act as turning,milling,drilling and endmilling with advanced process.

PVD coating technique has inherent advantage such as superior chipping resistance of coated film itself and maintain the toughness of carbide substrate.Thus it is possible to increase the tool life approximately 2-4 times longer than carbide cuttig tools.

PVD coating can make sharp cutting edge without blunting of sharp substrate.

Ti-base coating film can provide excellent surface finish and high accuracy machining due to the low affinity of Ti film and work piece.

Using TICN as main component,is harder than cemented carbide and has lower affinity with ferrorus work piece at high temperature,thus cermet have special advantage.

Variety of available grades as per ISO classification(P,MK)

Excellent resistance to thermal crack allows cutting with coolant.

Specially designed alloys have fine micro structure and low affinity with work piece.

They have excellent toughness in general.

P series  WC-TIC-TAC-CO  Excellent thermal shock resistance and resistance against plastic deformation.

M series  WC-TIC-TAC-CO  Comprehensive grades have excellent thermal shock resistance and superior strength.

K series  WC-CO  Hard and strong grades

for general cutting

suitable for general cutting condition cutting.

recommended cutting conditions

d=4.0-10.0mm   f=0.5-1.0mm/rev

P series for steel(P25-P50)

The basic choice as central insert.A PVD-coated grade with excellent wear resistance and toughness at low to moderate cutting speeds.Suitable as central and peripheral inserts.

M (M20-M40)

Basic choice for ISO M application area.PVD coated grade with excellent edge toughness and resistance against built-up edge.Suitable as central and peripheral inserts.

K(K10-30)

Basic choice as central insert for toughness demanding operations.A PVD-coated grade.

Suitable for toughness demanding applications as peripheral insert for coromant U drill in diameter 12.7-17mm.Good combination of wear resistance and toughness.A PVD-coated grade.

Product Description

1) Tungsten Carbide Turning Inserts:

CNMA Tungsten carbide inserts:

 

TNMG-V Tungsten carbide inserts:

 

CNMG-V Tungsten carbide inserts:

 

SNMG-V Tungsten carbide inserts:

 

2) Tungsten carbide Milling inserts: 

 

TPKN-PDR(L) / TPCN-PDR(L) Tungsten carbide milling inserts:

SNCN-ANN  /  SNKN-ANN Tungsten carbide milling inserts:

TPUN Tungsten carbide milling inserts:

SPUN-ZER Tungsten carbide milling inserts:

 SPCN / SPKN Tungsten carbide milling inserts:

 

Q 1. what's the payment term?  

 A. We accept TT,30% deposit and 70% balance agaisnt copy of BL

Q 2. how's the delivery time ?

 A. usually it will take about 25 - 30 days for production.

 But for new molds, the delivery date may 10days more, as we need about 10days to develop and check new molds.

Q 3. tell me the standard of package?

A. For the small capacity, it use carton, but for big capacity, we should use strong wooden case / metal drum for protection.

Q 4. Made by cutermized drawing or not?

A. We have mold design department. So we could produce goods with our own molds and with your drawing.

Q 5.Could you offer Form A or C/O ?  

A. It totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for this certificate.

Q 6.Would you accept to use our logo ?

A.If you have good quantity,it absolute no problem to do OEM.

Q 7.We want to know month capacity.  

A. monthly, we could supply 10–40 tons per month.

Q 8.Where is your market?

A. Our products are popular in Germany, America, Brazil, India, Russia, Indonesia, Philippines, Italy, Pakistan South Africa, Egypt and etc.

Q 9. For more informations for tungsten carbide tools, do contact with me. No matter by Email, by trademanager, by enquiry, by Skype and etc is ok.

Contact us: