nching: Put the rubber granulates and stain into the stirring barrel to stir, and then put into the adhesive to stir.this process requires for 6 minutes ( because the adhesive is easy to cure, so stir it when use ).
2. Weighing raw materials: weight the rubber granulates stirred, according to the granulates' thickness  requirement of the tiles .
3. Paving and pressing: Paving the rubber granulates weighted on the mold, then floated it by trowel. Firstly paving the surface rubber granulates which is fine and color, then the thickness and black.
4. Vulcanization molding: Covering anti adhesion cloth, pushing the mold into vulcanizer to vulcanize, the time of vulcanization accord to the thickness of the rubber tiles, in general, 3 -8inutes finished. After that, Mold separate automatic, then remove floor tile on the shelves to dry.
5. Inspecting: Inspect the surface of the floor tiles formity, no aberration, no flaw, line with the product quality.
6.it adopt number display time relay to lock mould automatic, timing alarm unlock mould.it fit with filling pressure automatic device,it can fill pressure automatic, it guarantee the workpiece quality.
7.hydraulic system adopt lower pressure high flow gear pump and higher pressure low flow axial pump paralle to supply oil. It guarantee heat board increase temperture very fast and save energy, with less accident and noise,long service life.