Inverter, buy 6~60KVA Inverter (Three ins/One out)-INQ Series on China Suppliers Mobile

Product Details

6~60KVA Inverter (Three ins/One out)-INQ Series

Product Description

6~60KVA Inverter (Three ins/One out)-INQ Series

INQ series INVERTER use the latest IGBT technology, with special designed control circuit, capable of precisely controlling all parameters of your equipments and providing high quality and reliable AC power source for your precise equipments. Taking small volumes, low noise with high stabilities and easy operation as important elements, the equipments also enjoy consistent excellent qualities and protections.

INQ series utilize microprocessor control to replace traditional analog or digital components in its control board. The design not only increases the MTBF but also provide a precise and reliable output. Additional feature with the microprocessor control is to communicate with laptop/equipment that is connected to the INVERTER via RS-232/RS-485 interface. By using the monitoring software, users can easily monitor INVERTER and can schedule to turn on/off INVERTER. Up to 3996 events can be recorded and saved in the INVERTER.

Technical data sheet:

INQ 6K3~60K3Three ins and one out
Model	6K3	10K3	15K3		20K3	30K3	40K3	50K3	60K3
Capacity (VA/W)	6K/4.8K	10K/8K	15K/12K		20K/16K	30K/24K	40K/32K	50K/40	60K/48K
AC input (Optional)	Three phase with four Lines+ground wire,380V±25%
Noise	≤60dB(distance 1m)					≤65dB(distance 1m)
Size (W×D×H,mm)	620×343×995					650×700×1510
Weight(Kg)	130	165	180		220	400	450	530	620
Common parameters
AC Input (Optional)	Frequency			50Hz /60Hz ± 10%
	Power factor			≥0.95
DC input	Nominal voltage			192VDC
AC Output	Voltage			{0> 220V± 0.5%<}0{><0}
	Voltage regulation			Stable ±1%,dynamic ±2%, (<20ms for 0-100%load change)
	Frequency stabilization			50Hz /60Hz ± 0.5%
	Frequency slow rate			< 1Hz / second
	Transient response			± 0.4% (100% instant load fluctuation)
	THD			<3% for linear load; <5% for non-linear load
	Wave form			True sine wave
Alarm	DC input under voltage			Beeps once every 1 second when DC input under voltage
	Inverter fault			Beeps continuously
Protection	DC input under voltage			Auto shutdown when DC input voltage below preset voltage
	Overload			110150% overload for 10 seconds, then auto jumps to AC BYPASS; Auto resumes when overload removed
	Over temperature			Auto jumps to AC BYPASS when INVERTER internal temperature >85°C
	Output short circuit			Current limits, auto shutdown, no fuse switch protection.
	Inverter fault			Auto jumps to AC BYPASS
	Noise Filter<0}			10~10KHz at 40 db; 100KHz~100MHz at 70 db
Display	LCD			AC input and output voltage, frequency; DC voltage and output power (%), etc
	LED (DC Low)			LED (DC low) turns on when DC input voltage low
Ambient	Temperature			0~40
	Relative humidity			10%~90% (No condensation)
	Altitude			1500 meters