Product Details

Specifications

Cable and Wires CCTV BNC M Short Connection Cable 3ft CCTV BNC Male to BNC Male Easy and convenient connection

Cable and Wires CCTV BNC M Short Connection Cable 3ft CCTV BNC Male to BNC Male Easy and convenient connection

The BNC connector is used for RF signal connections, for analogue and Serial Digital Interface video signals and CCTV equipment. It is also an alternative to the RCA connector when used for composite video on commercial video devices.

Specifications

2 Meter
Black moulded cable
RG-58/U Coaxial Cable
50 Ohm BNC cable

HD15 SVGA Male BNC Plugs

HD15 SVGA Male - 5x BNC Plugs

Specification

VGA male - 5 x BNC
28awg mini coax
Shield, Braid & Drain
Gold flashed contacts

SVGA to RGB Monitor Cable HD15 Male to 5 BNC

SVGA to BNC cable, colour coded BNC connectors red, blue, green and black.

Specification

SVGA HD15 male
Four BNC connectors
Mini Coaxial
28AWG
Foil, Braid and Drain wire

SVGA to RGB Monitor Cable - HD15 Male to 5 BNC cables from ComputerCableStore™ are the ideal way to connect your SVGA output to your RGB Monitor or High Definition TV, bypassing the TV's color decoder to provide the best image quality and clarity possible. The five BNC connectors include Horizontal and Vertical Sync as well as the three for Red, Green, and Blue. Fully support (Y, Pr, Pb), (Y, Cr, Cb) and RGB high resolution standards.

Super VGA was defined by the Video Electronics Standards Association (VESA), an open consortium set up to promote interoperability and define standards. When used as a resolution specification, the term SVGA normally refers to a resolution of 800 × 600 pixels. Super VGA was first defined in 1989. In that first version, it called for a resolution of 800 × 600 4-bit pixels. It was quickly extended to 1024 × 768 8-bit pixels, and well beyond that in the following years.

Super Video Graphics Array or Ultra Video Graphics Array, almost always abbreviated to Super VGA, Ultra VGA or just SVGA or UVGA is a broad term that covers a wide range of computer display standards.

The BNC (Bayonet Neill Concelman) connector is a very common type of RF connector used for terminating coaxial cable. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. BNC connectors were commonly used on 10base2 thin Ethernet networks, both on cable interconnections and network cards, though these have largely been replaced by newer Ethernet devices whose wiring does not use coaxial cable. Some ARCNET networks use BNC-terminated coax.

The RGB color model is an additive color model in which red, green, and blue light are added together in various ways to reproduce a broad array of colors. The name of the model comes from the initials of the three additive primary colors, red, green, and blue. The main purpose of the RGB color model is for the sensing, representation, and display of images in electronic systems, such as televisions and computers, though it has also been used in conventional photography. Before the electronic age, the RGB color model already had a solid theory behind it, based in human perception of colors.