Sand blasting machine
USD $1,500 - $5,000 /Set
Min.Order:1 Set
Hangzhou Huashengtong Machinery Equipment Co., Ltd.
Stainless steel water sand blasting machine1212W
Applications:Sandblasting with water 1212W with dust collect ,sperator ,blast gun with nozzle ,gloves ,water pump ,wet sand blaster are suitable for surface treatment of all products of metal, plastic and glass ect .
removing oxide skin. residues burrs and scratches can be used for decoration light .matte and strengthen
management , There are cyclone separation system and dust removal system , separator will separate the
abrasive from bust .and dust removal system can deal with and collect the emit useless dust .and can vibrating clean up dust automatically .dust remove effect of good .reduce the cost of abrasive and improve efficiency .and there is no environmental pollution .
Wet Sandblast Machine use water and sand to blast ,make the surface of workpiece more fine and save sand
Blasting media :water with White Aluminum Oxide . Brown Aluminum Oxide . Glass Beads
Model | HST-6868W | HST-9080W | HST-1212W | HST-9090W |
Capacity of Air supply | 0.4-0.8kg/ m3 | 0.4-0.8kg/ m3 | 0.4-0.8kg/ m3 | 0.4-0.8kg/ m3 |
Capacity of sand and water box | 15kg for water 5kg for abrasive | 15kg for water 5kg for abrasive | 15kg for water 5kg for abrasive | 15kg for water 5kg for abrasive |
Job compartment size | 680*680*580 | 800*700*580 | 1200*1200*800 | 900*900*800 |
Power Supply | 220V/380/50HZ | 220V/380/50HZ | 220V/380/50HZ | 220V/380/50HZ |
Specification
1.Material :Stainless steel
2.Capacity of sand and water box:15kg for water 5kg for abrasive
3.Cabin Structure:stainless steel
4.Voltage:380V/50HZ,220V/50HZ
5.Compressed air supply: Pressure:7-8bar(kg/cm2)
6.Flow of air:1.5-2.0m3/min
7.Bearing weight:50kg
8.Suit air Compressor :1CBM (7.5KW ,10hp)
Safe operation & Caution
1 Hold the gun ,must wear protected glassed or helmet
2 Should reliably hold the gun then, start the machine
3 Should often check safety gloves whether are damaged , exhaust flow from spray gun doesn’t allow to contact with exposed skin
4 Wear latex film or cotton gloves on hands ,to enable the healthy use of rubber safety gloves
5 In order to prevent debris enter the cabin , Should close the door when don’t use
1,before blasting and after blasting
2,working cabinet
Structure
Hangzhou Huashengtong Machinery Equipment Co.,Ltd
Address: XiaoShan District, HangZhou City, China.
Telephone Number: +86-0571-83733500
Fax Number: +86-0571-83733511
Zip Code: 311200
Website:
Chinese Website: www.zjhst.com
|