Heat conduction oil is a heat transfer media, because it has the advantage of heating evenly and adjusting the temperature accurately, and it could generate the high pressure, it has lots of advantages, such as good heat transmission, energy conservation and easy use. So the heat conduction oil was widely used on many occasion.

Heat conduction oil media has huge function on the improving the heat efficiency and saving energy.

 

  

(1) consumption,

(2) heated evenly, rapid,

(3) thermal stability, strong resistance to oxidation,

(4) with a durable, not easy carbon deposition,

(5) energy-saving, prolong service life heat carrier, small heat loss, which can save energy .Environmental protection, no emission, no pollution, 

(6) applied widely, can satisfy multiple heating equipment requirements.

 

 

 Using nano platinum, nano silver to compound carbon excitation function, activate the far-infrared absorption and release function, rapid heat absorption, and with the far-infrared form release, rapid transfer to thermal oil, shorten the heating time, improve efficiency.

 

 

 

 

(1) heat transfer oil boiler,

(2) heat transfer oil heater,

(3) heat transfer oil pump.

 

 

(1) avoid heat transfer oil oxidation

To set up the heat expansion slot filling in nitrogen protection to ensure that heat carrier system closed, avoid heat conduction oil contact with air and prolong the service life of heat conduction oil.

(2) avoid heat transfer oil of anti-coking

Strictly control the temperature of the heat transfer oil exit heat carrier, it shall not exceed the highest use temperature.

(3) inspect leakage regularly

Strengthen site monitoring, make sure that the heat carrier system intact not leak, regular testing equipment corrosion leakage situation, repair it when found the leakage .

(4) to prevent heat carrier being intermingled with water and other impurities

please adjust the temperature higher gradually before using the oil, and removing heat conduction oil of water and other light Lord of impurities.

(5) regularly make the test of heat transfer oil index

Regularly measure and analyze the heat carrier carbon residue, acid value, viscosity, flash point and melting point and master its quality change, analyze the reasons for such changes. When acid value exceeds 0.5 mg KOH/g, viscosity changes to 15%, flash point rate reaches 20%, carbon residue (mass fraction) reach 1.5%, which proofs that  heat conduction oil performance has changed .please appropriately complements new heat carrier, and make the system of the residual carbon basic remained stable.