4mm2 6mm2 10mm2 16mm2 25mm2 H07RN-F cable/tinned copper/EPR rubber cable/ rubber cable

1.Service Conditions

This product is suitable for the welding machine whose voltage to the ground is not more than 200V and pulsating current value is 400V.

2.Characteristics

1. Rated power-frequency voltage U0/U: 450/750V, 300/500V and 300/300V.

2. Maximum permitted operating temperature of conductor is 60°C.

3. Permitted lowest working temperature is -35°C.

4. Cables can be used at places contaminated by mineral oil and fuel oil.

5. D>25mm

The minimum bending radius is over 6 times of cable diameter.

D≤25mm

The minimum bending radius is over 4 times of cable diameter.

(D-Diameter of the cable)

3.H07RN-F

Standards: HD22.4

Note

Max continuous operating conductor temperature in normal use:

+60℃(in every case of mobile installation)

+85℃(fixed protected installation)

+200℃(in short circuit)

Permissible current rating is measured for an ambient temperature of 30℃ and a maximum operating and conductor temperature of 85℃. For other temperature please refer to correction factors.

Certification: Certified by VDE

4.H05RR-F

Standards: HD22.4

Note

Max continuous operating conductor temperature in normal use:

+60℃(in every case of mobile installation)

+85℃(fixed protected installation)

+200℃(in short circuit)

Permissible current rating is measured for an ambient temperature of 30℃ and a maximum operating and conductor temperature of 85℃. For other temperature please refer to correction factors.

Certification: Certified by VDE