led lighting edit softwre master and slave control controller
USD $75 - $90 /Piece
Min.Order:1 Piece
Shenzhen iPixel LED Light Co., Ltd.
YM-ST4K wireless synchronize DMX512 led light controller
ST4K Character:
a. wireless synchronize, control area 500 meters
b. with 4 output ports, each port can load 1024 pixels.
c. digital tube show the controller status.
d. program saved in SD card, maximum 15 files.
e. can adjust the play mode, speed etc.
f. over voltage protection.
g. support DMX512 protocol or others drive IC.
Dimension | 115*100*34mm | Signal type | DMX512 |
Weight | 200g | Color level | RGB 256 levels |
Voltage | DC 5-24V | Temperature | -20~65℃ |
Wattage | 5W | Load pixels | 2048 |
Output | 4 ports | Software | LED CTL |
Support IC | 1 line:TM1804,TM1829,UCS1903,TLS3001,TLS3008; 2 lines:DMX512,P9813,LPD6803,LPD8806,SM16716,WS2801,MBI6021,MBI6024,MY9221 etc. |
Panel function:
1.Digital tube display. 6.Antenna port.
2.Single mode / select program. 7.SD card
3.Cycle mode. 8.Power 1: DC 5-24V;
4.Add speed(1-30). 9.Power 2: DC5-24V; (use one of power)
5.Reduce speed(30-1). 10.Output signal port.
NOTE 1: “2”+“4”brightness add(1-10), “2”+“5”brightness reduce(10-1).
NOTE 2: switch of power, keeping press“3”and switch on power, the controller will change mode.
There are 3 mode, sender, receiver, and repeater.
NOTE 3; switch of power, keeping press“2”and switch on power, the controller will reset: Speed 20,
brightness 10, sender mode.
1:Number of program.(1,2,3,4,5,6,7,8,9,0,A,B,C,D,E,F)
2:Blinking indicator read SD card.
3:“ ”means single mode,“ ”means cycle mode.
5,7:Show plays speed.
| 1 | 2 | 3 |
SPI | GND | DATA | CLK |
DMX512 | GND | D+ | D- |
1.the playback speed + 2.Single / cycle
3.Play deceleration 4.Play the file plus
5. brightness plus 6. Clock plus
7. Less Brightness 8. Clock Less