male thread tank eductor,316 stainless tank nozzle,mixing liquid eductor

Product description

   * Nozzle Materials: Carbon fiber reinforced plastics or SS316.
   * Nozzle Structure: one-piece construction without internal parts.
   * Spray Patterns: Mixing liquid jet eductor.
   * Pressure Range: 1 to 4 bar (20 to 127 L/min).
   * Thread Size: 1/4", 3/8", 1/2", 3/4" BSPT.

Mixing liquid eductors are used to agitate or mix liquids stored in tanks, pits, or sumps.Mixing Eductors use a unique venturi design which enables smaller pumps to circulate large volumes of tank solution.Designed on the basis of the Bernoulli theory, fluid under pressure is pumped into the nozzle through its large flow opening.

Proformance data

Entrance diameter	Flow properties	Entrance pressure
		0.5BAR	1BAR	1.5BAR	2BAR	2.5BAR	3BAR	3.5BAR	4BAR
1/4"	Storage flow (L / min) "A"	11.3	16	19.5	23	25	28	30	32
3/8"		29	42	51	59	65	70	77	82
1/2"		36	53	62	72	83	88	97	103
3/4"		43	64	74	85	97	106	116	124
1/4"	Supplementary volume (L / min) "B"	42	59	72	84	93	102	110	118
3/8"		116	168	204	236	260	280	308	328
1/2"		131	212	251	288	324	352	386	421
3/4"		172	256	298	340	388	424	464	496
1/4"	Cyclic Total (L / min) "A" + "B"	53.3	75	91.5	107	118	130	140	150
3/8"		145	210	255	295	325	350	385	410
1/2"		180	265	313	360	405	440	482	515
3/4"		215	320	370	425	485	530	580	620
1/4"	Effective range (m)	0.91	1.5	2.1	2.6	3	3.7	4.3	5.2
3/8"		1.2	1.8	2.4	3	3.7	4.3	4.9	6.7
1/2"		1.3	2.1	3	3.6	4.5	5.2	6.4	8.6