DELIMING AGENT
Negotiable /Kilogram
Min.Order:150 Kilograms
Liuzhou Joyhood Trading Co., Ltd.
Leather Tanning Chemical
Properties
AXTAN KL shows the properties of the leather are equal to the chrome tanned leather with good fullness, softness and spring. AXTAN KL brings about the shrinkage temperature over 90°C. If you have higer requirement of TS, over 100°C also will be fulfilled. AXTAN KL gives the wet white with mild and light color tone, and exhibits an extraordinary dyeing effect. It eases to operate the subsequent process such as shaving and wringing.
AXTAN KL is by no means the chrome or other toxic heavy metal; it is environment friendly and not harmful to the human.
AXTAN KL is never has formaldehyde and organophosphate.
AXTAN KL assists to increase in the absorption of subsequent agents, and support to reduce the quantity between 20 to 30% fatliquor in comparison to chrome tanned pelts.
|
Chemical Nature
Appearance: Light beige powder
pH value(1:10, 25°C): 2.8±0.2
Solid content (%):>98%
Charge: cationic ion
Quantities to be used
The application of AXTAN KL is similar with chrome tanning agent.
For tannage we recommend that 3-4% AXTAN KL, based on limed weight, be offered. After addition of AXTAN KL the tanning process should be continued about 90 to 120 minutes before basifying.
Retannage Fixing dyes after fatliquoring | 0-4.0%AXTAN KL 0.5-2.0%AXTAN KL | Based on shaved weight of wet white Based on shaved weight of wet white |
Safety and Storage
It is not a hazardous chemical. Normal safety precautions associated with the handling of chemicals should be
observed.The product should be stored under steal in cool, dry place. Must not throw; keep out of sun and away
water. The product can be stored up to one year at normal temperature (25°C), if be stored as required. Please
always read and follow the product information in our safety data sheets.
Outstanding superiority:
1.Leather Tanning Chemical is good usable for all type of pelt to meet requirements of all styles of finished leather. The yield of leather will
be optimized.
2.It is also can be used in non-chrome pre-tanning system and non-chrome re-tanning system.
3.It contributes a greener and clear process, reduce the cost of sewage treatment because need not to consider
the chrome pollution. Leather products export trade won’t be limited by chromium VI. ( The REACH regulation
revised by European commission will be take effect in 1st May, 2015. It stipulate for the chromium VI content of
imported leather product is below 3 PPM.)
The properties of the AOXING Leather Tanning Chemical are equal to chrome tanned leather with good fullness,
softness and spring. The shrinkage temperature above 90°C will be achieved. Furthermore if
you have higher requirement of TS, above 100°C will also be fulfilled. It gives the wet white mild and light color
tone, and exhibits an extraordinary dyeing. The products assist to increase in absorption of subsequent agents,
such as fatliquors and filling agents,that support to reduce the quantity between 20% to 30% fatliquors in
comparison to chrome tanned pelts. It helps to reduce the COD of waste. The nonchrome tanning chemicals are
by no means the chrome or other toxic heavy metals. The products are environment friendly and not harmful to
human. AOXING promise our products never contain formaldehyde and organophosphate. The application of
AOXING nonchrome tanning system is similar with traditional chrome tanning processes, should not be
significantly altered. AOXING non-chrome tanning system is easy to operate the subsequent processes such
as shaving and wringing.Specific properties or effects are given above are based upon our perfect combination
of technology and our products.
In that case, the whole advanced non-chrome tanning system, not only the single product, is recommended.
The information given in this leaflet is based upon our current knowledge and experience of the products used.
Our office show
Aoxing factory show
Aoxing exhibition show
The finished leather show