Specifications

F/B browm/black film
Core Poplar,Hardwood,Brich,Combi
Size 1220x2440mm,1250x2500mm
Glue MR,WBP,Melamine
CE, ISO9001

Formwork plywood for construction

Shandong Ruiding international Co.,Ltd is the professional plywood supplier in China. In the past 10 years, the products have been exported to more than 40 countries, and we have received a lot of good feedback becasue of high quality of our products and best services.

The following are the specifications of plywood:

 

1) Size: 915*1830mm, 1220*2440mm, 1250*2500mm, 1220*2400mm, 1500*3000mm or requested.

2) Thickness: different thickness available, from 4mm to 30mm.

3) Core:poplar, birch, hardwood, combined or requested by clients

4) Glue: WBP, MR E1, E2, MR, WBP,MLM

5)Film: import dark brown film(Dynea or Store-enso) 120g/m2 Chine black, red or brown film.180-240g/m2.

6) Grade: A/A grade, B/BB, BB/BB, BB/CC, CC/DD or request.

7) Application: outdoor, furniture, furniture decorations, packing, concrete forming.

Moisture(6%-14%)&Density:

Birch: about 690kg/cbm

Combined: about 600kg/cbm

Poplar: about 500kg/cbm

 

CONSERVE AND MAINTAIN:
HOW TO CUT THE BEST FROM OUR FILM FACED PLYWOOD
STORAGE
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.
SEALING OF EDGES
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.
SEALING OF HOLES
Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
CLEANING AND REPAIR
To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete