Name: 9 in 1 jeway scooter parts PCB board
Brand: Maxfind
Availability: InStock

Product Details

9 in 1 jeway scooter parts PCB board / control boards

9 in 1 as a whole set:

Package included

mother board/mian board x 1

gyroscope board x 2

front led light board x2

power indication led light boardx 2

power cable x 1

charging cable x 1

Product Description

Maxfind self balancing scooter parts for hoverboard show

Professional photos will be provided after placing an order.

UPC Code can be provided if you need after payment.

We are selling almost all the parts of self balancing scooters !!

Product parameters

Control Board Size: 16.8 * 10 * 2.7cm (height containing highly capacitive)

Intelligent attitude board size: 10 * 5cm

Power indicator plate size: 4 * 4.8cm

Cool side lights board size: 7 * 2.2cm

Controllers learning Calibration: off, long press the power button for 5 seconds, "drip" sound until around headlights flash, attitude data successfully saved, to be re-switch. (In the calibration, be sure to keep the left and right pedals parallel to the ground.)

Mode Switching: power-on default low sensitivity mode (beginner mode), the off state, press the power button, and within seconds the power button is pressed again, issued a drip sound mode is switched to the high-sensitivity mode (Motion mode). Reboot back to learning mode.

Tilt protection: stepping on the pedal, the pedal must be less than the level of 10 degrees beyond the angle, the motor stops, status indication red.

Power indicator board each 6 LED.Cool side panel of each lamp 8 LED.

Uses: Suitable for assembling electric shilly car. Package contains:

Control board x1,

Intelligent attitude board x2,

Switching line x1,

Power Cord x1,

Power indicator board x2,

Cool side lamp plate x2,

Our Services

Our best services

Service details :	we will try our best to satisfy you- our dear customers.
Sample	Available , and we can send it to you immediately.
Trial order	Acceptable
Lead time	In 48 hours after the order is confirmed
Warranty	If it is not non-human damage, one year warranty is provided
Quality Check	100% checked before shipment
OEM&ODM	Both welcome .
After-sale Service	Feel free to contact us, we will try to solve any problem.

Shipping :

Sample order:1-5 working days; Bulk order:5-10 working days
For sample order,we suggest via air freight,DHL ,Fedex ,UPS,TNT. Delivery time: 6-10 working days
For bulk order,we suggest via sea freight. Delivery time: 30-45 working days
If you have your own shipping agent,pls don't hesitate to let us know

Payment :

Escrow, Western Union , T/T( Bank wire)

Look forward to your inquiry, and wish we can establish a long lasting relationship with you !

Packaging & Shipping

Packaging&Delivery

9 in 1 jeway scooter parts mother board

Delivery Detail: 5~7working days after order confirmation, if lager orders it would take longer time for shipment.

FAQ

FAQ

Q: Do I need to charge the batteries before using them?
A: Yes, you should charge the batteries fully before first using them.

Q: Do I need to "brake-in" my batteries?
A: Yes, the batteries will need to have a "break-in" cycle consisting of ~ three discharge/charge cycles before they will reach optimum performance.

This involves three complete discharge and three complete recharges.

After this initial "break-in" cycle the batteries will have maximum possible performance and less line voltage fluctuations under load.

Q: How long will the batteries hold their charge?
A: All the batteries will self-discharge when not in use.

The self-discharging rate depends on the temperature at which they are stored.

Excessively cold or hot storage temperatures will drain the batteries faster than normal.

Ideally the batteries should be stored at room temperature.

Q: Why should I recharge my batteries at least every 90days (Li-ion) when I'm not using them ?
A: Batteries naturally loose their charge over time.

To keep the batteries in optimal condition and extend their life.

It's recommended that a top-off recharge be performed at least every 90 days.

Q: What happen if I leave the power switch on longer than 5 minutes?
A: If you have left the power switch on or your product has not been charged for a long period of time,

the batteries may reach a stage at which it will no longer hold a charge.

Q:Is it normal that the batteries get warm when recharging?
A:Yes,it is normal that the batteries will become warm to the touch during the recharging process.

This is because the increase of the internal resistance and less energy conversion efficiency from electric energy to chemical energy.

Q:How long will my batteries last before needing replacement?
A:Average battery life depends on use and conditions.

Even with proper care, rechargeable batteries does not last forever

9 in 1 jeway scooter parts mother board